hex Bit T27, 1/4 Inch, S2 Steel

The optimal fit of the T20 bit minimizes the risk of damaging the screw head with correct use. Precise power transmission is also guaranteed with softer materials.

The 50mm length of the bit can help to set screws in deeper positions. The precise fit of the T20 ensures a good hold in the screw.

The optimal fit of the T20 bit is designed for precise power transmission on intact screw heads. With already worn heads, the grip can naturally be impaired.

Yes, the bit has a standard 1/4 inch drive. It therefore fits in all standard bit holders and cordless screwdrivers with the corresponding mount.

The 50 mm length is an advantage for hard-to-reach places. It makes it easier to reach screw heads in narrower or deeper areas.

The precise fit of the T20 bit significantly reduces the risk of over-tightening the screw head. However, the ultimate control over the tightening torque is the responsibility of the user and the tool used.

The 50mm length of the bit can serve as a useful extension in tight work areas or behind paneling. This often allows access to screws that would be unreachable with a directly attached screwdriver.

S2 steel is known for its hardness and durability, which also qualifies this bit for more demanding, professional use. It is designed for resistance and a long service life.

Yes, the T20 bit is made of durable S2 steel and is designed for demanding screw work, including stainless steel screws. The high material hardness ensures a good service life.

S2 steel is an alloyed tool steel that offers good strength. Although it is not rustproof, no immediate rust should occur with short-term contact with moisture during work. Dry storage is recommended.

The T20 bit is made of robust S2 steel and offers high resistance to wear and high torques. This also makes it suitable for repeated, demanding applications.

Thanks to the resistant S2 steel and precise manufacturing, the bit is very robust. It offers an optimal fit and minimizes the risk of rounding off with tight screws.

The bit is made of durable S2 steel, which makes it robust for common screw work. However, explicit suitability for impact drivers is not guaranteed, as higher forces are at play here.

Yes, the 1/4 inch drive of the bit is compatible with all common magnetic bit holders. This ensures a secure hold and easy work.

Yes, the bit is made of high-quality S2 steel. This material is known for its high wear resistance and ensures an above-average service life.

Yes, the T20 bit with 1/4 inch drive is ideal for standard bit holders in manual screwdrivers. The secure attachment ensures a firm fit during handling.

With a length of 50 mm, this bit offers a good reach. This is often sufficient to easily reach deeper recessed T20 screw heads.

The T20 bit is designed for optimal fit and high precision. It is therefore well suited for fine work and electrical installations where precise power transmission is important.

The S2 steel of the T20 bit is known for its high toughness and wear resistance. It retains its hardness and performance even with longer and repeated use under normal conditions.

The T20 bit is made of high-quality S2 steel, which ensures high durability and wear resistance. It is designed for repeated screwing and offers a long service life.