Socket Organizer Rail, 1/2-Inch Socket Holder, 8-Clip

Yes, the 200 mm long socket holder with 8 clips is ideal for tidy storage in the workshop trolley. It fits well in drawers or can be attached to walls.

With a length of 200 mm, the holder is compact and fits in many smaller compartments of tool trolleys. Please check the dimensions of your compartment.

The clips are designed to ensure quick and easy removal of the nuts without losing their secure hold.

Thanks to the robust clips, a secure hold of the sockets is guaranteed. Even with normal vibrations in the transporter, the nuts remain firmly on the rail.

The clips of the holder provide a secure hold, so that the sockets remain firmly in place even during movement or slight tipping. The construction is designed to be robust.

Yes, the socket holder is made of sturdy plastic and is designed for a secure hold. It also reliably holds heavier, older sockets in position.

The plastic holder is designed for the usual temperature range of a workshop. However, extreme sub-zero temperatures should be avoided so as not to affect the material properties.

The socket holder is specifically designed for 1/2 inch sockets. With a suitable adapter for 1/4 inch nuts, these could be held, but the optimal fit is guaranteed for 1/2 inch.

The clips are designed for quick and easy removal, so only a moderate amount of force is required. You should be able to remove the nuts without any problems.

Yes, the clips ensure a secure hold of the nuts. The holder can therefore also be used lying in a tool drawer without the nuts falling out.

Yes, the plastic holder can be easily wiped off with a cloth and a mild cleaner if it is oily or dirty. This does not affect its function.

The socket holder is designed for easy mounting. It has two holes for screws, which are not included. For a pegboard, you may need suitable hooks or screws.

Yes, the holder ensures safe storage and a firm fit for the sockets, ideal for transport in the toolbox too.

Yes, the holder is designed for 1/2 inch sockets and offers enough space for deep sockets. The clips hold the sockets securely, regardless of their length.

The holder is designed for sockets with a 1/2 inch drive. This refers to the drive, not directly to the metric or inch size of the nut itself. If your inch nuts have a 1/2 inch drive, they will fit.

No, mounting screws are not included in the scope of delivery of the socket holder. However, you can use standard screws that are suitable for wood.

Yes, the socket holder is designed for easy mounting and can be easily attached to a tool wall or workbench.

The holder is specially designed for sockets with a 1/2 inch drive. It offers a secure hold for this standard size.

Yes, the socket rails can easily be mounted side by side to create longer rows for storage. Each rail is 200 mm long.

The holder is made of sturdy plastic. Thanks to the stable construction, it is designed for a long service life and can withstand high loads.

The holder is robustly constructed and can withstand contact with common workshop fluids such as oil or grease. However, for optimal hold and a longer service life, we recommend cleaning the nuts regularly.

Yes, the clips are designed so that the nuts also hold securely with vertical mounting and can still be removed quickly and easily. A slight pull is enough.

The plastic material of the holder is not primarily designed for permanent UV exposure. Placement in direct sunlight can lead to material fatigue over time.

The socket holder can hold 8 sockets. For a typical basic set of 1/2-inch nuts (approx. 15-20 pieces), you will need about 2-3 of these rails.

The socket holder has a length of 200 mm. Please measure the width of your drawer to make sure it fits across.

The robust construction and secure clips of the BONI-DD-SCR-420008 are also designed for the weight of impact wrench sockets. They stay firmly on the rail.

The holder provides a secure hold for the nuts. However, with strong side blows or vibrations, it can happen that a nut pops out.

Yes, the socket holder is made of robust plastic and can withstand high loads. Heavy impact sockets are not a problem for it.

Yes, the 1/4 inch socket refers to the drive of the nut, not the shape of the nut itself. The rail holds both nuts with square and hexagon drives, as long as they are 1/4 inch.

The retaining clips on the rail are designed so that the sockets sit securely, but at the same time are always at hand and easy to remove.