3/4" Socket Rack - 12 Socket Clips - 560mm Socket Organizer

Yes, the 1/4 inch socket refers to the drive of the nut, not the shape of the nut itself. The rail holds both nuts with square and hexagon drives, as long as they are 1/4 inch.

Yes, the 200 mm long socket holder with 8 clips is ideal for tidy storage in the workshop trolley. It fits well in drawers or can be attached to walls.

The retaining clips on the rail are designed so that the sockets sit securely, but at the same time are always at hand and easy to remove.

Yes, the plastic holder is very easy to clean. It can be wiped with a damp cloth and is resistant to most workshop cleaners.

Yes, the rail can in principle be mounted on any suitable wooden top of a workbench. Make sure to use sufficiently long and suitable screws for a secure hold.

The rail's robust clips are designed to securely hold the 1/4 inch nuts. Even with normal workshop vibrations, the nuts should sit firmly.

The rail is specially designed to give you quick access to your 1/4 inch nuts through a clear organization. This effectively saves time and avoids long searching.

The socket rail is attached to your tool wall with screws. Screws for mounting are not included and must be purchased separately.

No, the rail is specifically designed to accommodate 1/4 inch nuts. Other sizes will not fit securely in the clips.

The rail made of chrome-plated steel is easy to clean. It is suitable for dusty environments; regular wiping with a damp cloth keeps it clean.

The robust clips of the rail are designed to hold your 1/4 inch nuts securely. They provide a firm grip so that the nuts don't simply fall off when handling the rail.

Each rail BONI-DD-SCR-241515 offers space for 15 nuts. For 60 nuts, you therefore need 4 of these rails (roughly calculated: 60 nuts / 15 clips per rail = 4 rails).

The socket rail is made of chrome-plated steel and equipped with robust clips. It can easily handle the weight of typical 1/4 inch impact wrench sockets.

The robust clips hold the nuts securely even when mounted overhead. Make sure the rail is firmly screwed to the underside of the workbench.

The product description does not mention any screws for mounting being included. Usually, suitable screws and wall plugs for your wall type must be purchased separately.

The clips are designed for quick access, so the nuts can be removed and reinserted with one hand with moderate effort. This saves time when working.

The rail is explicitly designed and optimized for holding 1/4 inch sockets. We cannot guarantee safe and permanent mounting for other tools.

The socket rail is intended for permanent attachment to a tool wall. Use in a vise is not intended and could damage the product.

Yes, you can easily mount several of these rails next to each other on your tool wall. This way you expand the capacity and keep all your nuts neatly ready.

Yes, the rail is made of chrome-plated steel. The chrome-plated surface ensures durability and offers good protection against corrosion, even in environments with increased humidity.

The rail is primarily intended for fixed mounting on a tool wall. It is only conditionally suitable for a mobile toolbox, as it must be screwed on and the nuts could come loose during strong vibrations in transport.

Absolutely. Thanks to the clear organization on the rail, you always have your 1/4 inch nuts at hand. This saves you valuable search time and nerves on your projects.

Yes, the rail is made of chrome-plated steel, which offers good protection against corrosion. Increased humidity should not affect the longevity of the rail.

The rail can accommodate up to 15 1/4 inch nuts. Each of the 15 clips holds a nut securely.

The rail has a length of 415 mm. This space should be available on your tool wall to optimally mount the BONI-DD-SCR-241515.

Yes, the bracket is designed for easy mounting on your tool wall. Thanks to the robust clips and chrome-plated steel, the rail remains stable even when fully loaded.

The clips of the socket rail are firmly connected to the rail and are not intended for individual replacement. If a clip is damaged, the entire rail is affected.

Yes, the rail is designed for all tools with a 1/4 inch socket. This also includes corresponding screwdriver bits.

The rail is made of chrome-plated steel and equipped with robust clips, which ensures durability in daily use. The material also protects against corrosion.

Yes, the clips are designed for standard 1/4 inch nuts. Even shorter versions of these nuts are held securely and firmly.