16mm Press Fitting Coupling with Female Thread, DVGW Certified

No, for the dimension 16 x 2.0 mm, the Multikontur coupling (TH + U) is compatible. So you can also use a U press jaw.

Yes, the integrated plastic guide ring allows safe pressing even in tight spots. The modern contour also aids in handling.

Yes, the coupling is DVGW-certified and fully suitable for drinking water. It also complies with the UBA positive list and is low in lead.

Yes, the coupling BONI-P62UI1604 is Multikontur (TH + U) compatible. It can be pressed with both TH and U-press jaws.

The multicontour is intended for the 16mm coupling. You can use both TH and U press jaws for a secure press.

Yes, the system is designed so that the connection is loose if not properly pressed. This is a safety feature and helps to immediately detect assembly errors.

Yes, the press fitting is suitable for heating systems. It is continuously loadable up to 10 bar and 70°C and has a maximum operating temperature of 95°C.

No, the void-free sealing with two O-rings effectively prevents the ingress of air oxygen. This ensures the highest safety.

Yes, the Pressfitting Kupplung is fully suitable for drinking water. It meets the requirements of the Drinking Water Ordinance and is DVGW-certified.

The long-term durability is specified as 10 bar / 70° C / 50 years. This corresponds to the DVGW-certified standards for this product with proper installation.

Yes, the coupling is suitable for such use. It has a long-term load capacity of 10 bar at 70°C for 50 years.

No, the fitting's modern contour is optimized for flow. Virtually no flow noise is to be expected.

Yes, the integrated inspection window in the stainless steel sleeve serves as a safety plus to recognize the correct insertion depth of the pipe.

Yes, the 50-year durability refers to long-term durability at 10 bar and 70°C. Under these DVGW-certified conditions, this is a realistic value for home installations.

For crimping, you need a suitable crimping tool with TH or U profile. The coupling 16 x 2.0 mm is compatible with both profiles.

Yes, the fitting system is designed for two pipe systems: multi-layer composite and copper pipes, provided they are DVGW certified.

Yes, the coupling is specifically designed for 16mm multilayer composite pipes and has a 1/2 inch internal thread. You can easily connect your faucet.

No, through the void-free compression with two O-rings, the ingress of air oxygen is effectively prevented.

Using other composite pipes than those sold by Boni-Shop is at your own risk. A proper connection is only possible with system-approved components.

No, the guide ring prevents the tube from being pushed out before the pressing process. This ensures precise and secure positioning.

Yes, the fitting is low-lead or lead-free. All components are DVGW-certified, comply with the UBA positive list, and meet the requirements of the Drinking Water Ordinance.

The plastic guide ring ensures secure pressing even in tight positions. The integrated inspection window in the stainless steel sleeve helps you check the correct insertion depth of the pipe.

No, thanks to the flow-optimized contour and free passage, there is practically no flow noise to be expected. The best ZETA values also ensure the maximum possible passage area and thus minimal pressure loss.

The fitting is flow-optimized and has a free passage, ensuring minimal noise and excellent ZETA values. It minimally affects the flow.

The correct insertion depth is visible through the three integrated inspection windows in the stainless steel press sleeve. This provides additional safety during installation.

Yes, the coupling is fully suitable for drinking water and DVGW-certified. All components are low in lead or lead-free and comply with the UBA positive list.

Yes, the BONI-P62UA1605 coupling is fully compatible with TH and U-press jaws. You can use both contours for a secure press.

The pipe end must be calibrated and deburred after cutting. Insert the pipe all the way into the fitting; the correct depth is recognized by the inspection windows of the stainless steel press sleeve.

The coupling is designed for a long-term durability of 50 years. Moreover, it is a high-quality product that is "Made in Germany".

Yes, for a quick and secure pipe connection you only need press fittings, aluminum composite pipe, pipe cutter, calibrator, and a suitable press tool. An illustrated installation guide is included with the photos.