Screw Fitting Wall Elbow V- 90° 20 x 2 - 1/2" IG - 20 x 2

Screw Fitting Wall Elbow V- 90° 20 x 2 - 1/2" IG - 20 x 2

Screw fittings for easy and quick installation without pressing tool

Advantages:

• Economical alternative to conventional press systems
• All materials are safe for use in drinking water and comply with the UBA positive list
• Two O-rings prevent the ingress of air oxygen

Properties:

   DVGW DW-8501CP0053

   Continuous load capacity: 10 bar / 70° C / 50 years

   Maximum operating temperature 95° C

Application areas:

   Drinking water installations

   Surface / ceiling heating

   Surface / ceiling cooling

   Radiator connection

   Oil-free compressed air up to 10 bar

Certifications:

   DVGW

   IMA

   EN ISO 21003

   GOST

   Hygiene Certificate

For a quick and secure pipe connection, you only need screw fittings, our aluminum composite pipe, a pipe cutter, and a calibrator.
For better understanding, we have provided a pictorial installation guide with the photos.

Installation guide:

• Cut the pipe to length with a suitable tool
• After cutting to length, the pipe end must be calibrated and deburred with a calibrator
• Position the union nut and clamping ring on the pipe according to the illustration. Then fully insert the nipple of the base body into the pipe. Push the clamping ring and union nut onto the fitting base body until they stop. The union nut can now be hand-tightened. 
• The union nut must be tightened with a suitable tool until the appropriate resistance is reached.
  Check the connection afterwards.

Please note that the use of other composite pipes than those distributed by Boni-Shop is at your own risk.
A compliant connection exists in all press systems only with system-approved components (fittings and pipes that have been tested together)
This applies to all composite pipe systems regardless of the manufacturer.