Industrial gloves
Here you will find industrial gloves for mechanics, including models made of nitrile, full grain cowhide and with cut protection. The selection includes gloves for various industrial applications.
Buying industrial gloves — guide & Tips
Whether in the workshop, garden, vehicle maintenance or chemical laboratory – industrial gloves protect your hands from injuries, chemicals, cold and dirt. The category includes 89 different models that differ in material, coating, cuff length and certification. To find the right hand protection, you should first know the exact place of use and the type of hazard.
For mechanical work such as assembly, packaging or light grinding, suitable are Nitrile-coated gloves or models made of full grain cowhide. They offer high abrasion resistance and good grip. For direct contact with solvents, oils or acids, Chemical protection gloves made of nitrile or latex the right choice – pay attention to EN 374 marking here. For activities with sharp edges or glass you need Cut-resistant gloves according to EN 388, which protect through integrated fibers such as Kevlar or stainless steel mesh.
An often underestimated point is the correct size: Gloves that are too tight restrict freedom of movement; gloves that are too loose reduce tactile sensitivity and may slip off. Measure the hand circumference just below the fingers – most manufacturers provide size charts. The cuff length also plays a role: short cuffs (approx. 25–30 cm) are sufficient for light work; long cuffs (from 35 cm) protect forearms and sleeves during immersion work or exposure to splashes.
Another quality feature is the Coating technology: Dipped gloves (fully coated) offer maximum chemical protection, while partial coatings (e.g., only on palm and fingers) are more breathable and allow more sensitivity. Pay attention to standards such as EN 388 (cut, puncture, abrasion, tear resistance) and EN 374 (chemical and microorganism protection). Many models are also suitable for contact with food. Also refer to the Parent category Occupational Safety & Safety, to supplement other protective equipment such as head protection or hearing protection.
Popular industrial gloves
These three models cover typical areas of use: The nitrile rubber glove is a robust all-rounder for mechanical stress, the latex glove is more suitable for light, wet work with good tactile sensitivity, and the chemical protection glove offers maximum resistance to aggressive substances. Depending on the hazard level, you should compare the EN marking on the product – for DIY home use, gloves with lower cut resistance are often sufficient, while professionals in industry must pay attention to higher protection classes.
Frequently asked questions
Which glove is best suited for which activity?
For mechanical work (assembly, packaging, gardening), nitrile-coated gloves or leather gloves are ideal – they offer abrasion resistance and grip. For contact with chemicals (cleaners, oils, acids), choose tested chemical protection gloves made of nitrile or latex with a long cuff. For cut-hazard tasks (glass, sheet metal), you need cut-resistant gloves according to EN 388, often with Kevlar or stainless steel fibers. Always pay attention to the pictograms on the packaging.
How do I find the right size for industrial gloves?
Measure the hand circumference in centimeters just below the fingers (excluding the thumb). For most models, there is a size chart: size 8 (S) corresponds to about 20–21 cm, size 9 (M) 22–23 cm, size 10 (L) 24–25 cm, size 11 (XL) 26–27 cm. The glove should fit snugly but not be tight. A glove that is too large reduces finger dexterity and can interfere with work.
What do the standards EN 388 and EN 374 mean?
EN 388 is the standard for mechanical gloves. It specifies four ratings: abrasion resistance (0–4), cut resistance (0–5), tear resistance (0–4), and puncture resistance (0–4). Higher numbers indicate better protection. EN 374 applies to chemical protective gloves: the standard tests resistance against specific chemicals (code A–L). Additionally, the letter 'A' stands for protection against microorganisms. Check before purchase whether the gloves are approved for your specific chemicals.
Can I reuse industrial gloves?
Disposable gloves made of thin latex or nitrile must be disposed of after a single use—especially in case of chemical contact or biological risks. Reusable gloves made of thicker nitrile, leather, or coated gloves can be cleaned and reused as long as they show no cracks or signs of wear. Follow the manufacturer's care instructions to maintain the protective effect.
Other categories
The Category Personal Protective Equipment & Safety includes not only gloves but also head protection, safety glasses, and respiratory protection. Depending on your work environment, you should combine your protective equipment. The area that may be particularly relevant for you is Work Gloves – there you will find additional models for lighter tasks such as assembly gloves or padded gloves. If you perform work with overhead hazards (e.g., on construction sites, in logistics), it is worth looking at Head Protection – from simple hard hats to alpine helmets with visors.
These alternatives are useful if you want to comprehensively upgrade your personal protective equipment or have specific professional requirements. For hobby use, basic gloves are often sufficient, but for regular work with machinery or chemicals, you should rely on certified products. The Personal Protective Equipment category &With over 150 items, safety offers a broad selection so that you can cover all relevant protection areas.
In short
89 industrial gloves are available – from lightweight latex gloves for gardening to certified chemical protection gloves for professionals. The decisive factors are the right material (nitrile, latex, leather), the correct size, and certification according to EN 388 or EN 374. Use the filters and product descriptions to find the model that fits your specific activity. Supplement your occupational safety as needed with head protection or other items from the overarching category.