Gas pipe, gas hose, CO2 hose - complete, 1.5 m

This CO2 hose is designed for the common operating pressures of CO2 bottles in beer and gas systems. It ensures a safe gas supply up to a bottle pressure of approx. 60 bar. (roughly calculated: This corresponds to the pressure of a full 2kg CO2 bottle at room temperature).

Yes, the CO2 hose is specially designed for use in beer and gas systems. The material is suitable for safe contact with beverages such as beer and ensures a safe gas supply.

The seals supplied are designed for a reliable and long-lasting seal. They offer a high degree of tightness even with regular bottle changes.

You can usually tighten the supplied wing nuts by hand. However, for the safety clamps, we recommend using a screwdriver for a particularly firm and leak-proof connection.

No, this CO2 hose is designed with 3/4 inch wing nuts and a 5/8 to 3/4 inch adapter for common beer and gas systems. Sodastream bottles usually use other, proprietary threads that are not directly compatible.

Yes, this CO2 hose is specially designed for use with common CO2 bottles, such as the 2kg variants. The supplied clamps and nozzles fit optimally.

The hose made of SK-Seile material is robust and at the same time flexible enough to be installed well even in confined spaces. It is designed for standard installations in the field of gas and beer systems.

The SK-Seile material is described as robust and durable. It is designed for permanent use and withstands normal stress and slight bending without damage.

The two straight nozzles are designed for standard beer and gas systems. Please check the specific requirements of your home tapping system for optimal fit.

Yes, the CO2 hose is equipped with 3/4 inch wing nuts and is supplied with an additional adapter from 5/8 to 3/4 inch. If you have 3/4 inch connections, you can use the hose directly without the adapter.

The hose is primarily designed for CO2 applications on beer and gas systems. Use for other gases such as nitrogen should only be done after checking the material compatibility.

This CO2 hose is designed as a complete, ready-to-connect element and is not intended for the direct connection of several hoses. An extension requires special connectors, which are not included.

The CO2 hose is 1.5 meters long, which is sufficient for most common setups of bottle and tap. Please check the required distance for your specific setup.

The 'SK-Seile' material is robust and durable. The hose can withstand light mechanical stress such as chafing during normal operation.

The SK-Seile material is described as robust and designed for durability. It offers good flexibility for laying, but strong kinks should be avoided so as not to impair the function.

Yes, the hose is supplied with 3/4 inch wing nuts and includes an adapter from 5/8 to 3/4 inch. This makes it compatible with standard 5/8 inch CO2 bottles.

Yes, the CO2 hose is directly equipped with 3/4 inch wing nuts. For a system with 3/4 inch connections, you do not need the supplied 5/8 to 3/4 inch adapter.

The robust SK-Seile material of the hose is durable and designed for reliable use. It is also suitable for frequent movement in commercial environments.

The hose has 3/4 inch wing nuts and an adapter from 5/8 to 3/4 inch. This covers the most common valve connections of CO2 bottles for beer and gas systems.

Yes, the hose made of robust SK-Seile material is suitable for use in typical basement environments. It retains its properties even at lower temperatures.

The CO2 hose (SKU 443444) comes complete with connections, 2 straight nozzles, clamps and seals. You can connect it directly to your home tapping system and use it without having to buy any additional accessories.

No, this hose is specifically designed as a CO2 hose for gas and beer systems. It is not intended for use with oxygen or other gases.

Yes, the CO2 hose comes complete with all necessary connections, adapters, nozzles, clamps and seals. You can use it directly for the commissioning of your beer or gas system.

Yes, the CO2 hose comes complete with two straight nozzles, the appropriate clamps and seals. This ensures a secure and leak-proof seal.

Yes, the 1.5 meter length is sufficient for most standard setups to connect a CO2 bottle under the counter to the dispensing system. This offers you flexibility in placement.

The CO2 hose is supplied as a complete set with connections, nozzles, clamps and seals. You can connect it directly to your beer or gas system and put it into operation.

Yes, the specified wire diameter of 12 mm is the outer diameter of the hose. This is relevant for planning the laying and selecting suitable brackets.

An inner diameter of 7 mm is sufficient for most home and smaller commercial beer and gas systems. It ensures an efficient gas flow for your system.