Hot Tub Sanitizer, Whirlpool Sanitizer, 500 ml Concentrate, Hot Tub Cleaner

During the 30-minute exposure time, you should switch on the circulation pump several times for 1-2 minutes. Continuous operation is not required.

After each bath, approx. 50 ml of the concentrate should be added to the used bath water. The water level must be regulated so that the nozzles are covered. The 500 ml bottle is sufficient for approx. 10 applications – this corresponds to about 10 days with daily use.

Yes, the concentrate is suitable for whirlpools with or without a dosing device. Add it pure to the dosing container provided and also observe the manufacturer's instructions here.

Before bathing, put the concentrate IZS-12444 directly into the dosing container provided. Always observe the specific manufacturer's instructions for your hot tub for use.

Yes, the special product reliably removes bacteria, fungi, germs and unpleasant odors. It also removes soap and grease deposits, which can often lead to slimy residues in the systems.

The contents and container of the concentrate IZS-12444 must be taken to hazardous waste disposal. This is important because of the ingredients classified as hazardous.

The concentrate should work for about 30 minutes after being added to the bath water. During this time, switch on the circulation pump several times for 1-2 minutes to aid distribution.

A 500 ml bottle of the IZS-12444 concentrate is enough for about 10 applications. That corresponds to about two and a half months with weekly use.

Yes, the concentrate is suitable for whirlpools with or without a dosing device. For integrated dosing systems, add it directly into the dosing container provided and follow the manufacturer's instructions.

After a longer period of non-use, use the concentrate IZS-12444 to combat germs before the next bath directly in the dosing container. This ensures hygiene.

Yes, the product is specially designed for the hygienic cleaning of pipe and pump systems, nozzles and the whirlpool tub. It disinfects and descales these hard-to-reach areas thoroughly.

The exposure time is about 30 minutes after you add the concentrate to the bath water. The circulation pump should be switched on several times for 1-2 minutes.

Yes, the highly concentrated special product is intended for quick and effective hygienic cleaning of pipe and pump systems. It removes microorganisms, limescale, and soap and grease deposits, even in hard-to-reach areas.

After each bath, add approx. 50 ml of the whirlpool disinfection 2 in 1 to the used bath water. Make sure that the nozzles are sufficiently covered with water.

Yes, after draining the water and running the pump briefly to rinse out the residue, it is important to rinse the tub well with plenty of clear water. This ensures the complete removal of product residue.

For whirlpools with an integrated dosing system, add the concentrate directly into the dosing container provided. Please always observe the specific manufacturer's instructions for your whirlpool.

A bottle of IZS-12444 with 500 ml concentrate is very economical and is sufficient for about 10 applications. When used after each bath, the bottle is enough for about 10 bath cycles.

After application, you must drain the water and rinse the tub well with plenty of clean water. Contact with the undiluted concentrate should be avoided as it causes severe corrosion.

Wear protective gloves, protective clothing, eye protection and face protection. After use, hands should be washed thoroughly, as the agent can cause corrosion.

The concentrate is designed for hygienic intensive cleaning of the jets and pipe systems in whirlpools. As long as your inflatable whirlpool has such a system, the application is basically suitable.

Yes, the special product reliably removes unpleasant odors as well as bacteria, germs, fungi and other microorganisms. It also removes soap and grease deposits that serve as a food source for microorganisms.

The concentrate is intended for hygienic cleaning after bathing. It is added to the used bath water and drained after 30 minutes of exposure time. An application without subsequent draining of water is not intended.

For regular hygiene, use is recommended after each bath. In case of prolonged non-use, intensive cleaning to combat germs is advisable before the next bath.

Yes, this 2-in-1 concentrate not only disinfects, but also descales the systems. It reliably removes limescale as well as soap and grease deposits from nozzles and pipes.

To combat germs after a longer period of non-use, add the concentrate directly into the dosing container of your hot tub. Always observe the specific manufacturer's instructions for your device.

For germ control after a long period of non-use, the concentrate should be added pure to the dosing container provided. If your whirlpool does not have an obvious dosing container, please follow the specific manufacturer's instructions for your whirlpool.

Yes, the concentrate not only removes bacteria and fungi, but also completely removes limescale as well as soap and grease deposits. These deposits often serve as a food source for microorganisms.

The concentrate is classified as a biocide and is very toxic to aquatic organisms (H400). The drained water should therefore not be directed into the garden, but must be disposed of as hazardous waste in accordance with local regulations (P501).

Yes, the concentrate reliably removes unpleasant odors. These are often caused by bacteria and other microorganisms, which the agent eliminates.

The concentrate is intended for both hygienic intensive cleaning and regular use after each bath. For this, add about 50 ml to the used bath water after bathing.