Mold Remover, Mildew Remover, Mold Spray, 500ml chlorine free

Yes, wearing eye protection is highly recommended. The product can cause severe eye irritation (H319).

Yes, the product is gentle on materials and suitable for textiles in closets. It effectively removes mildew and mold.

A 500 ml bottle is sufficient for approx. 5-10 m² depending on the infestation and the absorbency of the surface. For 8 m², one bottle should therefore be sufficient.

The Hotrega mold remover is a very efficient active cleaner for the safe and permanent removal of mildew stains, mold and bacteria. The effect is aimed at a thorough removal.

Yes, the HOTREGA mold remover can be used preventatively on thermal bridges, such as window corners. To do this, spray generously and let it dry.

Yes, the mold remover is gentle on materials and suitable for joints, tiles and plastics such as silicone. Wipe thoroughly after the exposure time.

After the extensive spraying for prevention, the product must dry completely. Only then can the surface be easily painted or wallpapered. An exact time depends on the room temperature and humidity.

Yes, the product is gentle on materials and suitable for plaster and wallpaper. It can also be used on painted walls without damaging the paint.

Yes, the product is suitable for use in refrigerators and is odorless. After the exposure time, you should thoroughly wipe the treated surfaces with a brush or sponge to remove residues.

Yes, the product can be used on lacquered wood as it is gentle on materials. Re-oiling is usually not necessary as the formulation is not aggressive.

Yes, the product is ideal for preventing cold bridges behind furniture. After saturating and drying, the surface can be easily painted or wallpapered.

Yes, the mold remover is also suitable for kitchens and cabinets. It is odorless and gentle on materials for use on surfaces such as wood or plastic.

No, do not pre-treat the mold growth. This would prevent the distribution of mold spores. Spray the product directly onto the affected area.

After spraying, the product should work for at least 5-6 hours, ideally overnight. Then wipe with a soft brush or sponge.

The product can cause skin irritation. In case of contact with clothing and skin, you should wash them immediately with plenty of water. Always wear protective clothing and gloves for protection.

Yes, the HOTREGA mold remover is odorless and gentle on materials. It is ideal for wallpaper in living rooms and bedrooms.

The yield of the mold remover is 5-10 sqm per 500ml bottle, depending on the absorbency of the surface. When 'spraying thoroughly' preventatively, consumption is more likely at the upper end of the scale, i.e. about 5 sqm per bottle. (Roughly speaking: One bottle is enough for about 5-10 m² for prevention.)

Yes, the mold remover is also suitable for leather. Its material-friendly formulation allows it to be used on sensitive surfaces.

The product is chlorine-free and odorless, which allows for trouble-free use in children's rooms. It is gentle on materials on many surfaces.

The product is primarily designed for indoor use, such as living and bedrooms. An outdoor application is not explicitly recommended, as the long-term effect under weather conditions is not guaranteed.