Decking Oil 3 Liter, Terrace Oil, Light Exterior Wood Oil

The SC terrace oil can be used in dry weather in a temperature range of +5°C to +35°C. Processing outside of this range is not recommended.

Sticky spots occur when excess material has not been removed. After the last coat, excess oil must be removed with a clean cloth after about 30-60 minutes.

Yes, the SC Terrassen-Öl is suitable for wood types such as Garapa. It protects the wood fibers from drying out and cracking in the long term.

Yes, experience shows that a repeat coat per year is sufficient for optimal protection. In the case of severe weather conditions or intensive use, the condition of the wood should be checked regularly.

As long as the oil has not dried, work tools can be cleaned with paint thinner or cleaning gasoline. Dried oil can only be removed with a paint remover.

New wood, especially pressure-treated wood, should remain untreated in the first year. Cleaning with SC-HOLZ-ENTGRAUER before oil treatment is recommended only in the following season.

Experience shows that a repeat coat is necessary once a year. For this, the surface only needs to be cleaned, sanding is not necessary.

You should allow intervals of 15 to 25 minutes between the individual coats. It is important that the previous coat does not dry during this time to ensure wet-on-wet working.

These oil-soaked cloths can self-ignite if disposed of improperly. Therefore, they should be spread out to dry before disposal or collected in sealed metal containers to avoid the risk of fire.

The light pigmentation of the SC Terrassen-Öl intensifies the original wood color without darkening it significantly. For an accurate assessment of the color, a test coat in an inconspicuous place is recommended.

No, the SC Terrassen-Öl should generally not be applied in direct strong sunlight. Choose a dry day without strong sun to achieve optimal results.

Yes, for surfaces that have already been treated with other oils, cleaning with SC-HOLZ-ENTGRAUER is necessary as soon as the wood is slightly grayed. After that, the SC Terrassen-Öl can be applied.

The complete drying time of the oil treatment is between 24 and 48 hours at 20°C. Only then is the terrace fully walkable again.

Experience shows that a repeat coat per year is necessary to maintain the deep protection and appearance. Even if the patio still looks good, weather and use affect the protective effect.

Yes, the SC Terrassen-Öl is basically suitable for all absorbent woods and wooden components outdoors. Teak falls into this category of suitable wood types.

Yes, after the last coat, excess material must be removed with a clean cloth after about 30-60 minutes. If this is not done, the surface may remain sticky.

You can put your garden furniture back on the patio after the complete drying time of 24 to 48 hours at 20°C. Ensure undisturbed drying of the surface until then.

The processing temperature for the SC Terrassen-Öl is between +5°C and +35°C. Dry weather during application is also important.

A 3-liter can of SC Terrassen-Öl is not sufficient for a 20 m² patio with two coats. You will need between 6 and 8 liters. (Roughly calculated: approx. 150-200 ml/m² per coat, i.e. 6-8 liters for 20 m² with two coats).

Yes, the SC Terrassen-Öl has a preventative effect to protect against mold, algae, and fungal growth. In addition, it protects against drying out and cracking.

The oil is specially designed for absorbent woods outdoors such as Garapa, Douglas fir and pine. It protects these types of wood from drying out and cracking.

The product description does not contain specific information about the smell. The SC Terrassen-Öl is an oil-based product, which, due to its design, may have a certain inherent smell.

The oil is suitable for Douglas fir, but new wood should remain untreated in the first year. This allows for controlled drying and the opening of the wood pores.

After the complete drying of the patio oil, which takes 24 to 48 hours, the surface can be used normally again. The safety instructions must be observed during processing and drying.

Yes, the SC Terrassen-Öl is suitable for all absorbent woods and wooden components outdoors, including larch. A test coat in an inconspicuous place is recommended.

Apply the oil two to three times, three times for very dry wood. It is important to work wet-on-wet with intervals of 15 to 25 minutes between coats. 3 liters are sufficient for an area of about 7.5 to 10 m² with two coats.

For a double application, the 3-liter canister is sufficient for areas of approximately 7.5 to 10 m². The consumption is 150-200 ml/m² per coat, depending on the absorbency of the wood. (Roughly calculated: approx. 7.5 - 10 m² for two coats)

Yes, paints or stains must be completely removed before using SC Terrassen-Öl. Only then can the wood absorb the oil and the protection work.