Decking Oil 1 Liter, Terrace Oil, Exterior Wood Oil, Light

The complete drying time of the SC Terrassen-Öl at 20°C is 24 to 48 hours. Only then is the terrace fully walkable again. Make sure to remove excess material after the last coat to avoid stickiness.

No, one liter is not sufficient for 12 m² and two coats. The consumption is about 150-200 ml/m² per coat, so for 12 m² and two coats you would need about 3.6 to 4.8 liters.

For a repeat coat once a year, the surface only needs to be cleaned. Sanding is not necessary to renew the protection.

A sticky surface occurs when excess material has not been removed. After the last coat, you should wipe off excess oil with a clean cloth after 30-60 minutes. If the oil has already dried and is sticky, it can only be removed with a paint remover.

With heavy use and high weather exposure, experience has shown that an annual recoating is necessary. For this, the surface only needs to be cleaned, sanding is not required.

For an area of 5 m² and two coats, you need about 1.5 to 2 liters of the terrace oil. The exact consumption depends on the absorbency of the wood. (Roughly: One liter is enough for about 2.5 to 3.3 m² with two coats.)

A repeat coat is, according to experience, necessary annually, depending on weather and use. The surface only needs to be cleaned beforehand, sanding is not necessary.

New wood, especially pressure-treated wood, should remain untreated for the first year. Only then, after cleaning with SC-HOLZ-ENTGRAUER, is the treatment with the terrace oil carried out.

Yes, the patio oil is explicitly suitable for outdoor wood types such as Douglas fir, Garapa or pine. It protects the wood fibers from drying out in the long term.

No, with wood that has already grayed, sanding before the first coat is not necessary. However, thorough cleaning with SC-HOLZ-ENTGRAUER is required before applying the oil.

At an ambient temperature of 20°C, the complete drying time of the oil treatment is 24 to 48 hours. Only after this time is the terrace fully walkable again.

To prevent the surface from remaining sticky, it is important to remove excess material after the last coat (approx. 30-60 minutes after application) with a clean cloth. If this note is followed, the surface should not remain sticky.

Yes, the SC terrace oil is expressly suitable for wooden components in the outdoor area such as fences, privacy screens and pergolas. It offers deep protection and weather resistance even on vertical surfaces.

You can apply the patio oil with both a brush and a roller. It is important that you apply it carefully and evenly in two to three wet-on-wet coats.

Paints or glazes must be completely removed before application. For surfaces that have already been treated with other oils, it is sufficient to treat them with SC HOLZ-ENTGRAUER as soon as they are slightly grayed.

Yes, the SC Terrassen-Öl is suitable for all absorbent woods and wooden components in the outdoor area. This also includes garden furniture made of hardwood.

Yes, the patio oil is suitable for all absorbent woods and wooden components outdoors, this also includes teak. The wood must be dry and absorbent before application.

Yes, cloths soaked in oil can self-ignite. Collect them in sealed metal containers or spread them out to dry before disposal to prevent self-ignition.

The SC Terrassen-ÖL is weakly brownish pigmented to intensify the natural wood color. Mixing with other oils is not intended and could impair the protective effect. To assess the color tone, you should apply a test coat in an inconspicuous place.

Yes, the SC Terrassen-Öl works preventatively to protect against mold, algae, and fungal growth. It protects the wood fibers long-term and helps to reduce the formation of green coatings.

The individual layers of the SC Terrassen-Öl should be applied wet-on-wet at intervals of 15 to 25 minutes, without intermediate drying. After the last coat, it is important to remove excess material after about 30-60 minutes with a clean cloth.

For particularly dry or porous wood, a triple coat of SC Terrassen-Öl can be useful. The coats should be applied wet-on-wet at intervals of 15 to 25 minutes. One liter is sufficient for three coats on approximately 1.6 to 2.2 m² of surface area, depending on the absorbency.

The SCANDICCARE terrace oil intensifies the original wood color through its light pigmentation. It protects the wood fibers from drying out and cracking in the long term, which helps to preserve the natural look.

No, paints or stains must be completely removed before using the SC Terrassen-Öl. The wood must be able to absorb so that the oil can penetrate and develop its protective effect.

Yes, new wood, especially pressure-treated wood, should remain untreated for the first year. This allows for controlled drying and the necessary opening of the pores for optimal oil absorption.

One liter of SC Terrassen-ÖL is sufficient for approximately 2.5 to 3.3 m² of surface area with two coats (roughly calculated: 1000 ml / (2 x 150-200 ml/m²)). For your 15 m² terrace, you will therefore need about 4 to 6 liters of the oil.

The terrace oil should be processed in dry weather and at ambient temperatures between +5°C and +35°C. Application below 5°C is not recommended, as this can affect drying and effectiveness.

No, the SCANDICCARE terrace oil should generally not be applied in direct strong sunlight. For optimal application, dry weather at temperatures between 5°C and 35°C is ideal.

The SC Terrassen-ÖL is suitable for all absorbent woods and wooden components in the outdoor area. This also includes wood types such as bangkirai, provided they are absorbent.

To work wet-on-wet, apply the further layers of oil at intervals of 15 to 25 minutes. It is important to do this before the previous layer is completely dry. This way the wood remains absorbent and the surface is evenly sealed.