PU Cleaner 750ml, Floor Cleaner, Hard Floor Cleaner, Surface Cleaner

For maintenance cleaning in the cleaning machine, the concentrate can be diluted to a ratio of 1:400. This corresponds to 25 ml of cleaner per 10 liters of water.

For construction cleaning (initial cleaning) in case of heavy soiling, you should dilute the cleaner in a ratio of 1:10. For lighter soiling, the concentration can be reduced.

Yes, sensitive surfaces such as wood, metal or furniture should not be wetted with the cleaning solution. Pay attention to precise application when cleaning.

For initial cleaning in case of heavy soiling, dilute the DR. SCHUTZ PU cleaner in a ratio of 1:10 (1 liter to 10 liters of water). For lighter soiling, you can reduce the concentration according to the degree of soiling.

The DR. SCHUTZ PU Reiniger is also suitable for cleaning machines. For this purpose, the dilution can be increased to up to 1:400 (25 ml per 10 liters of water).

No, the cleaner is specially designed for elastic floor coverings with factory-applied PU/PUR coating or treated with Dr. Schutz PU-Siegel, such as plastic and rubber. Laminate floors are generally not suitable for this.

The cleaner is safe when used properly according to the safety instructions and good wiping with clear water and ventilation. However, it must not get into the hands of children and eye contact must be avoided.

For routine cleaning, the instructions for use do not specify a separate wiping with clear water for neutralization. The floor is simply wiped with the diluted solution.

Yes, the DR. SCHUTZ PU Reiniger has excellent dirt-binding properties and reliably removes greasy residues from rubber floors with PU coating. The product was specially developed for this purpose.

Yes, the product is labeled with H319 as 'causes serious eye irritation' according to safety instructions. It must not get into the hands of children (P102).

No, the cleaner should always be used diluted. For heavy soiling, a dilution of 1:10 (1 liter cleaner to 10 liters of water) is recommended.

For the final cleaning, about 2 liters of cleaner are needed per 100 m². For a 200 m² area, you would therefore need around 4 liters. (roughly calculated: the 750ml bottle is sufficient for about 37.5 m²).

The DR. SCHUTZ PU cleaner is specially designed for PU/PUR-coated floor coverings made of plastic (PVC, polyolefin) and rubber. The product is not intended for linoleum.

No, a machine is not absolutely necessary. For larger areas, the use of a single-disc machine is recommended, but manual scrubbing is also possible.

According to the instructions for use, the cleaning solution should be scrubbed after a short exposure time. A precise time is not specified, often 5-10 minutes is sufficient.

Yes, the DR. SCHUTZ PU cleaner is also suitable for hard floors that have been treated with a Dr. Schutz PU seal.

No, the DR. SCHUTZ PU cleaner is specially developed for PU/PUR-coated floor coverings and hard floors. Despite the pH of approx. 9.5 in the concentrate, it ensures gentle cleaning without leaching the surface or forming gray veils.

For maintenance cleaning, you need 0.1 liters of the concentrate per 100 m². A 750ml bottle is therefore sufficient for about 750 m² of cleaned area. (roughly calculated: For this, about 150 liters of water must be diluted with the concentrate).

Yes, the Dr. Schutz PU Reiniger was developed to avoid gray haze on the surface. It removes them effectively and ensures streak-free cleaning.

Yes, the cleaner is suitable for rubber floors and has an excellent dirt-binding ability, even with fatty residues. Therefore, it should also remove oily marks and tire abrasion.

The cleaner contains fragrances, including limonene. Therefore, it is not odor-neutral, but emits a corresponding fragrance during and after use.

Yes, the Dr. Schutz PU Reiniger is ideal for the initial cleaning of heavily soiled PU/PUR-coated PVC floors, even with grease residue. Dilute it in a 1:10 ratio for heavy soiling.

For a final cleaning, the consumption is about 2 liters per 100 m². For your 25 m², you therefore need about 0.5 liters of the cleaner. A 750 ml bottle is sufficient for this.

For maintenance cleaning, 0.1 liters of cleaner are required per 100 m². A 750ml bottle is therefore sufficient for about 5 cleanings of your 150 m² office space. (roughly calculated: you need 0.15 liters per cleaning).

The DR. SCHUTZ PU cleaner is suitable for hard floors with Dr. Schutz PU seal. However, with wood as the base, care must be taken to ensure that sensitive surfaces are not wetted with the cleaning solution.

In case of contact with the eyes, rinse immediately with water for a few minutes and remove contact lenses if possible. If eye irritation persists, seek medical advice.

Yes, the cleaner has excellent dirt-binding properties, even with greasy residues, and is suitable for rubber floors. For heavy soiling, you should dilute the product in a 1:10 ratio.

Yes, after removing the dirty water, it is necessary to wipe with clear water to neutralize the floor. This ensures streak-free cleaning.