Weed Killer 2 Liter, Vinegar Weed Killer, Garden Weed Killer

Yes, Flechtex is ideal for roof tiles. Special protective components ensure long-lasting protection and permanently lichen-free surfaces.

Yes, for optimal effect, it is important that the surface remains dry during the entire 30-minute exposure time and that the product is not washed away. In case of rain, the process would have to be repeated.

Please do not use Flechtex below an outside temperature of +15 °C. It is best to plan the application for warmer days to ensure the optimal effect.

The Flechtex offers long-lasting protection and ensures permanently lichen-free surfaces. A regular repetition of the application is recommended in case of renewed lichen infestation, as no fixed interval duration is specified.

No, the Flechtex must be stored frost-free. An unheated garage, in which the temperature can fall below freezing, is not suitable for this.

Yes, Flechtex can be used without any problems on natural stones like granite and thus also on tombstones. It reliably removes lichens and protects the surface for a long time.

Yes, the surface to be treated must be absolutely dry. This is crucial for the optimal effect of the lichen remover.

A 2-liter canister of Flechtex is sufficient for an area of about 20 m². For your 50 m² driveway, you will need about 2.5 canisters. We recommend 3 canisters for a complete treatment.

Yes, Flechtex is ideal for roof tiles and other alkali-resistant stone surfaces. However, please always check the compatibility first in an inconspicuous place.

The application of the Flechtex remover is relatively straightforward: spray on, leave for 30 minutes and then work with a brush and water. For a particularly comfortable application, we recommend the Hotrega foam pressure sprayer.

Please be sure to adhere to the exposure time of 30 minutes and do not let the product work longer. The lichen remover contains corrosive components that can cause damage with longer exposure.

After the exposure time of 30 minutes, the dead lichen body must be removed from the surface with a brush or scrubber. The intensity depends on the degree of infestation.

Flechtex is specially developed for alkali-resistant surfaces such as stone, plaster and masonry. It should not get on plants, as the active ingredients can cause damage.

Yes, Flechtex contains corrosive ingredients that can damage plants. Carefully protect surrounding plants from spray mist and direct contact.

Flechtex is a biocide and contains corrosive substances that can cause severe burns. It must not get into the hands of children and contact with the skin should be avoided. After application, the surface should be thoroughly washed with plenty of water to remove residues.

Flechtex is suitable for alkali-resistant surfaces such as natural stone, but you should definitely test the compatibility in a hidden area. Subsequent brushing or scrubbing to loosen the dead lichen bodies is required.

Yes, the product works reliably against all lichens, regardless of their nature or color. Residues of climbing plants on the facade can also be removed with it.

The surface to be treated must be dry before use. An additional pre-cleaning is not explicitly required, but the dryness of the surface is crucial for the optimal effect.

The product should not be used in direct sunlight. The outside temperature must also be above +15 °C to achieve an optimal effect.

The Hotrega Schaum-Druckspritze is recommended for a foam-stable adhesion and reduced spray mist. The application is in principle also possible without this sprayer, however, the adhesion and distribution can vary.

Yes, the 2-liter canister of Flechtex is sufficient for your 15 square meter driveway. The yield is about 20 m² per 2 liters, so you have enough reserve.

A 2-liter canister of Flechtex is very economical and is sufficient for areas of approx. 20 m². For your 35 m² yard area, you will therefore probably need two canisters.

No, Flechtex is a ready-to-use solution. It is sprayed directly and undiluted onto the dry surface.

Yes, Flechtex was developed to reliably work against all types of lichens, including stubborn and old deposits. If necessary, the process can be repeated.

Yes, Flechtex is ideal for plaster and house facades. It gently removes lichens and offers long-lasting protection for these surfaces.

Yes, Flechtex is also effective against residue from climbing plants. It breaks down the symbiosis and helps to gently remove these residues from the surfaces.

Flechtex can be used on plastered facades, but only on alkali-resistant surfaces. We strongly recommend testing the product in a hidden area to check compatibility with your facade paint before full application.

Yes, the exposure time of 30 minutes must be adhered to exactly. A longer exposure time is not necessary and is not recommended.

Flechtex can be used on all alkali-resistant surfaces. For coated concrete slabs or glazed tiles, we recommend performing a compatibility test in an inconspicuous area. This ensures that no unwanted reactions occur.

The Flechtex is designed for alkali-resistant surfaces such as concrete, natural stone, clinker or plaster. Wooden decks are usually not alkali-resistant, so we advise against using it on wood.