Polyester filler, 2K filler, auto body filler, fine filler 500 g

Before the top coat, an insulating layer, such as acrylic thick-layer filler or EP filler, must be applied. This protects against blistering and color changes in the top coat.

An overdose of the hardener can lead to color changes in the topcoat system. An addition of 2-3% hardener paste is recommended.

The ideal processing temperature is 15-20°C. At cooler temperatures, the drying or curing time is significantly extended. Preheating the surface can help.

Yes, the FEW fine filler is suitable for bonding metal with light loads. The surface must be clean, dry and free of grease and also sanded.

Yes, the filler is suitable for processing weathered and corroded surfaces of other materials, including metal. The surface must be clean, dry and free of grease.

At a room temperature of 18 - 20° C, the filled surface can be sanded after 15 - 20 minutes. The ideal processing temperature is also 15 - 20° C.

The FEW Feinspachtel is primarily a drawing and fine filler for pore filling and evening out slight unevenness. For deeper holes, you should first use a filler or fiber filler.

Yes, the 500g pot FEW Feinspachtel is well suited for evening out small scratches. With an average layer thickness of 0.5 mm, you can treat an area of around 0.5 m².

Styrene-free means less odor nuisance during processing and is beneficial for the environment and the user's health. It meets the highest quality standards for professional use.

Yes, the fine filler has a smooth consistency and is well-suited for contouring in model making. The thixotropic nature allows for precise work.

Yes, the FEW is suitable for evening out small and large unevenness on steel sheets. The surface must be clean, dry and free of grease.

Yes, the product is suitable for quick repair of local damage to color-matched gelcoats in weather-exposed areas and on boats above the waterline.

The surface must be clean, dry and free of grease. Good adhesion is achieved on all roughly sanded surfaces. Remove sanding dust before starting work.

Yes, the FEW is very suitable for covering surfaces that have previously been treated with filler or fiber filler. It closes any remaining pores and unevenness in the base filler and achieves a finer surface.

Yes, the FEW Feinspachtel is suitable for bonding stone with light loads. The processing of weathered surfaces of other materials is also possible.

Thanks to its thixotropic consistency, the FEW filler allows a smooth filling of medium unevenness even on vertical surfaces without dripping.

At a room temperature of 18 - 20° C, the pot life of the filler is 3 - 4 minutes. Processing must be carried out within this time frame.

Yes, the FEW Feinspachtel is ideal for working on joints, chips and weathering marks on wooden surfaces such as windows and frames before repainting.

Yes, an insulating layer is also recommended for wooden surfaces before repainting. This prevents possible blistering and color influence in the topcoat system.

The pot life at 18-20°C is 3-4 minutes, which requires rapid processing. It is recommended to mix only small quantities to have enough time.

Yes, the FEW spatula has been specially developed for repairing small scratches and paint damage in the bodywork area. It ensures a closed, fine surface.

Yes, the FEW is ideal for covering surfaces that have been previously treated with filler or fiber filler. It achieves a finer and less absorbent surface and closes pores.

The 500g can of FEW Feinspachtel has a volume of approx. 267 cm³. This is more than sufficient for an area of 10x10 cm (100 cm²) at usual layer thicknesses. (Roughly calculated: at a layer thickness of 5 mm, about 50 cm³ of material is needed).

Yes, the FEW is suitable for bonding wood, stone, metal and GRP parts with light loads. The surface must be clean, dry and free of grease.

Yes, before applying the top coat, an insulating layer such as acrylic thick-film filler or EP filler must be applied. This protects against blistering and color changes.

Yes, to avoid blistering, dry sanding is absolutely necessary, as polyester materials are sensitive to moisture.

Yes, the FEW Feinspachtel can be used to even out small and large unevenness on GFK parts. A slightly load-bearing bonding of GFK parts is also possible.

Yes, the hardened filler can be baked up to a maximum of 80°C. This makes it possible to use it on metal parts with subsequent heat exposure.