PVC Cleaner, PVC Restoration, PVC Discoloration Remover, PVC Yellowing Cleaner, Vinyl Cleaner, Yellowed PVC Repair, PVC Cleaning Kit, Restore Vinyl, PVC Maintenance

The set contains 250 ml of yellowing remover and 250 ml of intensive cleaner. This is usually enough for several window frames or a comparable area, such as 4-5 m² of plastic surface with careful application. (Roughly calculated: approx. 8-10 typical window frames on both sides).

The set is specially designed for white PVC windows, doors, roller shutters and other white PVC surfaces. It removes yellowing caused by UV radiation, pollution and incorrect cleaning agents.

The Fenosol PVC yellowing remover set has been specially developed for *white* PVC hard surfaces. It is not intended for colored PVC parts and should not be used.

The cleaner can cause skin irritation and allergic skin reactions. It is strongly recommended that you observe the safety instructions and wear protective clothing and gloves.

Yes, the Fenosol set is specially designed for removing yellowing on white PVC doors as well as windows and roller shutters. It restores the original degree of whiteness.

Yes, the set is explicitly designed to remove yellowing, which is also caused by incorrect or aggressive cleaning agents, among other things. It works against chemical reactions on the surface.

Age-related or structurally deep-seated yellowing of the PVC cannot be removed with the set, unfortunately. It works effectively against superficial discoloration caused by UV radiation and environmental influences.

Yes, the Fenosol set is explicitly suitable for yellowing caused by incorrect cleaning agents. It removes them quickly and reliably.

The Intensivreiniger is used for after-treatment and sealing of the surface after removing yellowing. It protects the new white. Using it alone without prior cleaning of the yellowing is not the primary purpose.

The set is not intended to remove reddish-brown discoloration or burns. These can occur due to thermal shock on already damaged profiles.

The manufacturer recommends a compatibility test in an inconspicuous place. The IZS-31467 is described as slightly dissolving, so this test is important beforehand to check suitability for your specific PVC surfaces.

The Fenosol PVC-Vergilbungsentferner is a weakly dissolving product. Before full application, be sure to perform your own tests in an inconspicuous area to check compatibility and achieve optimal results.

No, the Fenosol PVC yellowing remover set is exclusively intended for use on white PVC hard surfaces. It should not be used on colored PVC.

The Fenosol intensive cleaner seals the surface so that the new white remains for a long time and new yellowing is counteracted. However, the exact duration depends on environmental influences and stress.

The Fenosol set is intended for white PVC-hard surfaces such as windows, doors and roller shutters. For shower cubicles made of plastic, we recommend testing the compatibility of the cleaner in a small, hidden area, as the product has a weak dissolving effect.

The products of the Fenosol set have a temperature resistance of 5°C. Application below this temperature is not recommended to achieve optimal results.

The Fenosol PVC yellowing remover set contains flammable liquid and vapors. Please keep the product and its vapors away from heat, sparks, open flames and hot surfaces and do not smoke during use.

Age-related yellowing of the PVC cannot be removed with the Fenosol set. It works on yellowing caused by UV radiation, environmental pollution and incorrect cleaning agents.

The Fenosol set is specially designed for yellow discoloration caused by UV radiation, environmental pollution and incorrect cleaning agents. Reddish-brown stains or burns, which often arise as pre-damage from thermal shock, cannot be removed with it.

The set is specially designed for white PVC hard surfaces such as windows, doors and roller shutters. For PVC floors, suitability is not explicitly stated, therefore, self-tests for compatibility are absolutely necessary.

Yes, after applying and thoroughly rubbing the surface with Fenosol Intensivreiniger, it is important to wash the treated surface with clear water at the end.

No, age-related yellowing of the PVC unfortunately cannot be removed with the Fenosol PVC yellowing remover set. It works on yellowing caused by UV radiation, environmental pollution and incorrect cleaning agents.

Yes, the set is suitable for white hard PVC surfaces such as windows, doors and roller shutters. Other hard PVC surfaces such as balcony furniture made of hard PVC can also be treated.

Yes, after applying and rubbing in the intensive cleaner, you should finally wash the treated surface thoroughly with clear water. This removes residues and ensures a clean surface.

Yes, the set reliably removes yellowing caused by environmental pollution such as fine dust and exhaust fumes. It is suitable for all white PVC hard surfaces.

Yes, yellowing caused by UV radiation can be effectively removed with the Fenosol PVC yellowing remover. The subsequent intensive cleaner additionally protects the surface.

The Fenosol intensive cleaner is used for the after-treatment and sealing of the cleaned surface. This helps to maintain the new white for a long time and to prevent a quick re-occurrence of yellowing.

As long as it's white PVC hard surfaces, the application of the set is basically possible. Be sure to carry out a compatibility test in an inconspicuous place beforehand, as the yellowing remover is slightly dissolving.

Both components of the Fenosol set have a temperature resistance of 5°C. Therefore, the products should be stored in a cool place, but frost-free and protected from temperatures below 5°C to maintain effectiveness.

Before using the Fenosol PVC yellowing remover, the surface to be treated must be absolutely free of dust and grease. Thorough cleaning with a neutral cleaner and water is recommended.