BPO Hardener 50g, Polyester Hardener, White Hardener, Resin Hardener

Yes, the hardener is intended for quick repair kits for plastic and GfK components and accelerates hardening.

The BPO hardener enables rapid polymerization of KR resins and polyester fillers. This allows demolding and sanding in a short time.

If you use too little hardener, the curing can be greatly delayed or not occur at all. This significantly affects the strength of the repair and can lead to permanently sticky spots.

Yes, the BPO hardener has been specially developed for the rapid polymerization of polyester filler.

Yes, as it is a white paste ('Förster weiß'), it will affect the color of clear resins and make them whitish. Therefore, the product is not suitable for transparent applications.

The BPO hardener enables demolding and sanding in a short time. The exact waiting time depends on the material mixture and the ambient temperature, but is significantly reduced compared to other hardeners.

The hardener is added in small amounts, usually 1-3%, to the respective filler or resin. Please note the exact specifications of the manufacturer of the filler to be hardened.

Please wear protective gloves, protective clothing and eye protection. The hardener causes skin irritation and serious eye irritation and can trigger allergic reactions.

The hardener itself is an additive; the weather resistance results from the filler or resin used. In general, well-executed repairs with polyester products are durable and weatherproof.

Yes, the hardener is also suitable for filling work in the automotive sector, provided polyester filler or KR resins are used. It is designed for general repairs in the trades.

Yes, the hardener facilitates demolding after polymerization and ensures smooth surfaces, ideal for a clean finish.

Yes, the YACHTCARE BPO hardener is stable at low temperatures. It enables the polymerization of resins and fillers even at low ambient temperatures in a short time.

The 50g can is intended for precise dosing without waste and is sufficient for smaller repairs and quick repair kits. For a dent in the plastic kayak, the amount should be sufficient.

Yes, the hardener is labeled as 'Toxic to aquatic life with long lasting effects' (H411). Release to the environment must be avoided according to the safety instructions (P273).

Yes, the hardener allows demolding and sanding in a short time, even at low ambient temperatures.

In case of skin irritation or rash, you should seek medical advice and seek medical help. Always wear protective gloves and clothing when handling the YACHTCARE BPO hardener.

Yes, the BPO paste is ideal for quick repair kits for plastic and GFK components. It ensures rapid polymerization of the filler or resin.

No, the BPO hardener is specially developed for the polymerization of KR resins and polyester filler. It is not intended for epoxy resins and should not be used.

Yes, the hardener is also suitable for applications in model making and mold making, especially when a quick cure is required.

Yes, the BPO hardener Förster weiß enables rapid hardening of fillers and resins, even at low ambient temperatures.

The 50 g BPO paste is a hardener component, the mixing ratio of which depends on the resin or filler used. Please note the information for the respective main product. (Roughly speaking: Typically, 1-3% hardener content is recommended, which means that 50 g can be sufficient for 1.5 to 5 kg of filler.)

The BPO hardener is specially developed for filling work in the repair and boat sector. It enables rapid hardening and processing. Always observe the instructions for use and safety precautions.

The YACHTCARE BPO hardener is primarily intended for the rapid polymerization of KR resins and polyester fillers. Compatibility is not explicitly stated for other resin types.

An opened package should be stored well sealed, in a cool and dry place to extend the shelf life. Avoid direct sunlight and high temperatures.

Yes, the BPO paste is suitable for the rapid polymerization of KR resins and ensures quick demolding and sanding.

The BPO paste can release fumes during processing that should not be inhaled. Ensure good ventilation and wear a suitable respirator according to safety notice P260.

Yes, the hardener is suitable for model making and mold making. It accelerates hardening and facilitates demolding to achieve smooth surfaces.

The designation 'Förster weiß' refers to the color of the BPO paste itself. It usually has no significant influence on the final color of the repaired surface, especially if it will be overpainted.