KIDSDEPOT wall bracket for lampshades "Origami"

Clean the surface of the metal bracket with a damp, soft cloth and then dry it thoroughly. Avoid direct moisture to prevent tarnishing.

The bracket is primarily designed for vertical mounting to optimally present the associated lampshades. Horizontal mounting is technically possible but may affect the aesthetics or functionality.

The wall mount is deliberately supplied without a cable and socket. A suitable lamp socket and the necessary wiring must be purchased and connected separately.

The Kidsdepot wall holder has a height of 32 cm. For a harmonious look, lampshades that are proportional to this height and do not appear significantly smaller are recommended.

The bracket is made of sturdy metal and designed for a stable hold. The "freedom of design" allows for the attachment of various shade materials, provided the shade's dimensions are suitable.

Yes, the bracket is made of sturdy metal and provides a stable fixation. Proper wall mounting with suitable wall plugs is crucial for safety, especially in children's rooms.

Yes, the holder is made of robust metal and provides a stable hold even for heavier lampshades. Its dimensions of 27 x 5.5 x 32 cm ensure sufficient stability.

The mount is deliberately designed without cables and sockets to give you maximum design freedom. You can therefore individually design and neatly install your own cabling and socket.

The lampshade is mechanically attached to the bracket. Special accessories are not included, as the method of attachment depends on the specific lampshade.

The holder is designed flexibly and supports lampshades that fit well within the dimensions of 27 x 32 cm. The depth of 5.5 cm determines how far the shade protrudes from the wall.

No, the Kidsdepot wall bracket is exclusively designed for mounting on vertical walls. Ceiling mounting is not intended.

The bracket itself has a depth of 5.5 cm. The distance of the entire setup from the wall additionally depends on the depth of the lampshade used.

The bracket itself is robust and stable. However, for secure mounting, a flat wall surface is important. For very uneven walls, you should use appropriate anchors and, if necessary, washers.

Yes, the modern design and clean lines of the metal holder create subtle accents even without a lampshade. It can act as a stylish element in the room.

Although the name is "Kidsdepot," the wall mount creates a stylish atmosphere in any room. It is therefore also well-suited for hallways or stairwells.

The wall mount should be kept away from direct moisture to ensure the longevity of the metal. Therefore, the product is not ideal for use in humid bathrooms.

Screws and wall plugs for wall mounting are not included with the bracket delivery. These must be purchased separately, depending on your wall type.

The mount is perfectly tailored to Kidsdepot origami cone and small balloon lamps. Thanks to the flexible design without cables and sockets, however, you can also use other lampshades as long as they fit mechanically.

Before installation, the wall surface should be checked. For drywall, we recommend using suitable special anchors to ensure a secure and stable hold of the bracket.

Yes, the dimensions 27 x 5.5 x 32 cm correspond to width x depth x height of the metal frame. This gives the holder a striking appearance.