Pressure reducer, pressure regulator CO2 for AFG, 7bar, 1-line, Thread: Thread 1/2

The pressure reducer is suitable for operation in typical basement environments. However, extreme frost temperatures should be avoided to protect the seals and the functionality of the device.

Yes, the SK 427-002 is designed for precise and constant CO2 delivery. This protects the quality of your beer and ensures reliable carbonation during dispensing.

The pressure reducer is designed for CO2 bottles with a 1/2'' threaded connection. Please check the compatibility of your Sodastream bottle's connection, as they often have different threads.

Yes, the pressure reducer offers the choice between an AG 1/2'' thread and a John Guest 8 mm connection for the output. It is thus directly compatible with your system.

No, the pressure reducer is designed as a 1-line system and can only supply one keg or a tap system with CO2 at the same time. For two kegs, a pressure regulator with multiple outlets would be needed.

The maximum output pressure of 7 bar is completely sufficient for most common beer and AFG dispensing systems and kegs to achieve optimal carbonation.

The pressure reducer is intended for AFG systems (non-alcoholic beverages) and beer installations. It ensures optimal carbonation of various drinks.

The regulator SK 427-002 is designed for CO2 cylinder pressures up to 250 bar. The integrated pressure gauge displays this pressure range, so you can always keep an eye on the cylinder pressure.

Yes, the pressure reducer SK 427-002 is equipped with an AG 1/2'' thread. This connection allows for a direct and straightforward installation on your draft system.

Yes, the pressure regulator is suitable for precise CO2 supply for beverage systems, including carbonating water. The maximum output power is 7 bar.

Yes, the integrated pressure gauge with a range of 0-250 bar is sufficient to accurately monitor the pressure of standard CO2 bottles. This way, you’ll know early when refilling is needed.

The precise pressure regulation of the SK 427-002 allows for a constant CO2 supply for optimal carbonation. You can fine-tune the desired output pressure up to a maximum of 7 bar.

Yes, the regulator is suitable for CO2 bottles. It has a right-hand connection and offers the choice between AG 1/2'' thread or John Guest 8 mm for the outlet.

The SK 427-002 allows precise and continuous pressure regulation. You can set the output pressure exactly to the desired value up to a maximum of 7 bar.

Before changing the cylinder, set the pressure regulator to zero and close the cylinder valve. After changing, slowly open the cylinder valve and reset the working pressure to avoid damage.

Yes, the pressure regulator SK 427-002 is designed as a 1-line system. It thus supplies CO2 to a single tap system or a single beverage.

The pressure gauge of the SK 427-002 has a range of 0-250 bar and is clearly marked. For optimal readability in poor lighting, however, additional lighting is recommended.

Yes, the outlet connection for this model is on the right side. This is important for planning the hose routing in your setup.

Yes, the pressure reducer is explicitly suitable for AFG systems (non-alcoholic beverages) with a maximum pressure of 7 bar. It can therefore also be used for soda dispensing systems.

The pressure reducer offers a flexible connection with AG 1/2'' thread or John Guest 8 mm. Depending on the connection type of your old draft system, adapters may be necessary if neither of the standard connections fits.