Wort chiller - Chill'in 50, stainless steel

Yes, the Chill'in 50 is made of robust stainless steel and is very durable, ideal for every brewer. Additionally, you receive a 3-year warranty on the device.

The cooling speed of the Chill'in 50 mainly depends on the temperature and flow of the cooling water. A higher water flow speeds up the process.

The Chill'in 50 is optimized for cooling 50 liters in 20 minutes. For 60 liters, the cooling time increases accordingly, possibly to 25-30 minutes, depending on water temperature and flow.

The Chill'in 50 reliably cools the wort to the range of 20-25 °C, which is ideal for most fermentations. Precise temperature control helps achieve the desired results.

The Chill'in 50 is made of food-grade stainless steel and is suitable for cooling liquids. Use for juices or similar is possible in principle, provided hygiene regulations are followed.

The Chill'in 50 has an outer diameter of 26.5 cm. It is ideal for brewing kettles whose opening is larger than this diameter to ensure easy immersion.

The 3-year warranty refers to material and manufacturing defects. It generally applies to private use as well; for commercial use, specific terms and conditions often apply, which are not explicitly excluded.

The Chill'in 50 cools 50 liters of wort to the ideal fermentation temperature of 20-25 °C in just 20 minutes. The device allows precise temperature control and protects the flavors.

The Chill'in 50 enables quick cooling through efficient heat exchange. This saves significant time compared to passive cooling methods and indirectly also water through the accelerated process.

With an outer diameter of 26.5 cm, the Chill'in 50 fits well into most common 50-liter brewing kettles. The total height is 55 cm, the coil itself is 19 cm high.

No, the Chill'in 50 is made of durable stainless steel and is resistant to rust and corrosion. This ensures long-term use and preserves the quality of your beer.

The wort chiller is compatible with Gardena garden hose connections. You can easily connect it to your water source.

Yes, the Chill'in 50 fits in a 30L pot, provided it has an inner diameter of more than 26.5 cm. The spiral itself is 19 cm tall.

The cooler is made of robust stainless steel and is corrosion-resistant. However, it is designed for use during the brewing process and should not be stored permanently outdoors to ensure longevity.

Yes, the Chill'in 50 also works excellently with smaller quantities of wort. It cools 50 liters in 20 minutes; for 25 liters, you can expect a cooling time of about 10 minutes (roughly: half the quantity = half the time).

Cleaning the Chill'in 50 is very easy. Thanks to the smooth stainless steel surface, it is easy to maintain and reuse.

The device is "easy to maintain and operate". Complete disassembly is not necessary for cleaning; thorough rinsing after use is sufficient.

The Chill'in 50 weighs only 2 kg and is very easy to handle and operate thanks to its compact size and Gardena compatibility.

With proper installation of Gardena hose connections and moderate water pressure, there should be no significant splashing water. The system is designed for closed water flow.

With a weight of only 2 kg, the wort chiller is very light and handy. It can be easily lifted and positioned in the brewing kettle, even for people with less strength.