Disinfectant, cleaning agents - TM Desana, 6kg

The color violet-green in cleaning quality control indicates that the cleaning agent is active and effective. This serves as a visual check of the cleaning process.

Yes, the alkaline formula with active chlorine is very effective in removing stubborn deposits, including hop resin and biofilms.

The product is also suitable for longer cleaning cycles of more than four weeks. With infrequent use, cleaning before operation and after the last tap is sufficient for optimal hygiene.

The alkaline formula is particularly effective against organic residues like fats, proteins, and hop resins. It effectively dissolves stubborn deposits and ensures thorough cleaning.

Yes, the product was specifically developed for effective cleaning and disinfection of beer and beverage draft systems, including older systems. It also reliably removes stubborn deposits.

Yes, TM Desana is specially designed with active chlorine and an alkaline formula to effortlessly remove stubborn deposits and biofilms even in heavily contaminated systems.

No, TM Desana is specifically developed for beer and beverage dispensing systems. For milk systems, other cleaners specialized in milk residues are required.

Yes, TM Desana was specifically developed to ensure effective hygiene even with older and heavily soiled draft systems.

TM Desana is a concentrate and must be diluted. The recommended mixing ratio is 300 ml of cleaner to 10 liters of water for the cleaning solution.

Yes, TM Desana is designed for all beer and beverage dispensing systems. This includes soda dispensers, as it removes biofilms and deposits as an alkaline cleaner.

Yes, TM Desana is suitable and safe for use with materials commonly found in beer and beverage systems, including plastic pipes.

Thanks to its active chlorine content and alkaline formula, TM Desana removes biofilms and stubborn deposits particularly effectively, even in older systems.

Yes, as an alkaline disinfectant with active chlorine, TM Desana is also very effective in removing mold and other microbial biofilms.

Yes, TM Desana effortlessly removes stubborn biofilms and other slimy deposits in the pipes thanks to its active chlorine. It ensures hygiene even in older systems.

A 6kg container is enough for about 20 cleaning cycles with a solution of 10 liters each (roughly calculated: 6000 ml / 300 ml per 10L = 20). The required amount of solution depends on the pipe diameter and the total volume of the beer system, not just the length of the pipe.

With 6 kg TM Desana, assuming a density of 1 kg/l, 200 liters of cleaning solution can be prepared (6000 ml / 300 ml * 10 l). Assuming 10 liters of solution per cleaning cycle, the 6 kg will last for about 20 cycles.

For 10 liters of cleaning solution, you need 300 ml TM Desana. The exact amount depends on the volume of your specific tap system.

The color Violet-Green indicates successful cleaning. A different color may suggest insufficient cleaning or residues in the system, in which case the cleaning process should be repeated.

No, TM Desana is specifically formulated for cleaning and disinfecting beer and beverage dispensing systems. Other cleaning agents are intended for coffee machines.

The product is suitable for cleaning in longer cycles of more than four weeks. The exact frequency depends on the usage frequency and hygiene regulations.