Beer tower - Easy, satin steel, ø30x350h

Yes, the beer tower is universal and can be used for parties. It is important to ensure a stable and secure attachment of the shaft with the 5/8 inch nut to the beer table or a suitable surface.

For tightening the 5/8 inch nut, no special wrench is required. A suitable wrench or pipe wrench is usually sufficient.

Yes, the beer tower is universal and perfectly suited for home use and parties. Its stylish design enhances any event.

The beer tower is designed for professional and home use and offers secure mounting. When properly installed, it withstands daily, frequent use.

The installation of the beer tower is possible for everyone thanks to the plug-and-play design and easy handling. The included nut ensures quick and hassle-free mounting.

With a height of 35 cm, the beer tower is compact and should fit under most standard counters. Please check the exact height of your counter.

The installation of the beer tower is easy thanks to the plug-and-play design. It only requires attaching the shaft with the 5/8 inch nut before connecting it to the draft system.

The beer tower is equipped with a 5/8 inch shaft and nut, a common standard size for counters. Compatibility depends on the connections of your draft system.

The tap for creating an internal thread for the shaft is not included in the delivery. For installation through a bar, a hole usually needs to be drilled and the shaft secured with the included nut.

The beer tower made of satin-finished steel is sturdy and suitable for outdoor use at parties. It is recommended to store it dry after use to maintain its appearance.

The secure attachment of the shaft with the 5/8 inch nut ensures a stable stand of the beer tower. When properly assembled, it is robust against light bumps.

The beer tower is primarily designed for beer, but can basically also be used for other cold drinks like soft drinks. Thorough cleaning is advisable when changing beverages.

Taps or flow meters with a 5/8 inch connection thread can be attached to the beer tower. The shaft and nut are designed for this standard connection.

The beer tower is made of satin-finished steel, a material known for its corrosion resistance. With regular exposure to moisture and good care, rust is not an issue.

The beer tower itself is a draft tower for mounting a tap (referred to as a 'counter'). A tap is not included in the delivery and must be purchased separately.

Yes, the beer tower is suitable for both professional and private use. The design and quality are optimized for use in bars.

The beer tower is made of sturdy satin-finished steel, making it very resistant for daily use. The material is designed for longevity.

Yes, the satin-finished steel not only provides an elegant look but is also very easy to clean. Simple care is sufficient for hygienic operation.

Yes, the beer tower is designed as a draft column and can easily be integrated into an existing beer system with a flow-through cooler. The connection is made via the tap.

The beer tower is made of satin-finished steel, which allows for easy cleaning. A damp cloth and, if necessary, a mild cleaning agent are sufficient to remove sticky residues.