Blow siphon - with tap and anti-bottom set stopper

The lifter is designed for transferring beer, wine and similar liquids. For very viscous media, the function by blowing may not be optimal.

After each use, the jack should simply be rinsed and then stored dry. An elaborate cleaning is not necessary.

The siphon has a length of 93 cm. This is usually sufficient to draw off liquid from the bottom of large 30-liter fermentation balloons or similar containers.

The lifter is designed for bottles and containers with an opening of a maximum of 5 cm inner diameter. It is not suitable for narrower necks below this measurement.

Yes, the device can be used for chilled liquids. The maximum operating temperature is 60°C; common refrigerator temperatures are not a problem.

Yes, the integrated tap is easy to use and allows you to interrupt or dose the transfer process precisely at any time.

Yes, the lifter is very user-friendly and is explicitly recommended as an ideal solution for beginners in the homebrewing area. It requires no pumping or electricity.

Yes, the integrated anti-sediment stopper is specially designed to effectively prevent the ingress of sediment. Therefore, you need to worry less about clouding.

Yes, the lifter is suitable for transferring beer and other liquids, including juice or water. Note the maximum temperature of 60°C and alcohol resistance up to 20% vol.

The lifter is designed for an alcohol resistance of a maximum of 20% vol. Therefore, the device is not suitable for spirits with a higher percentage.

The siphon has a length of 93 cm. With that, it should also be sufficient in most common large fermentation tanks to transfer liquids near the bottom.

Blowing is very easy and effortless. You just blow briefly into the supplied hose, and the siphon automatically starts transferring the liquid.

The lifter is designed for use with bottles and containers that have an opening with a maximum inner diameter of 5 cm. It doesn't fit with smaller openings.

Yes, the integrated tap allows easy and precise control of the flow rate. You can use it to interrupt or dose the lifting of the liquid at any time.

The flow rate of the lifter is about 5 liters per minute. A 25-liter fermentation tank can be transferred in about 5 minutes with it.

No, the lifter is equipped with an anti-sediment stopper. This effectively prevents the ingress of sediment and ensures clear decanting.

Yes, the anti-sediment stopper works reliably regardless of the color of the liquid. Its mechanical function prevents the ingress of particles, whether light or dark.

The lifter has a flow rate of approx. 5 liters per minute. Transferring a 20-liter barrel therefore takes about 4 minutes. (Roughly calculated: 20 liters / 5 l/min = 4 minutes).

It is sufficient to immerse the lifter hose in the liquid and then blow into the hose. The lifter then automatically starts the transfer process.

The maximum operating temperature for the lifter is 60°C. The device is not designed for liquids that are hotter.