Screw Lock High Strength - EURO-LOCK A.27.60 for passive materials up to M36

After 2 to 4 hours the adhesive reaches functional strength. Light loads are then possible. Full final strength is achieved after 8 hours.

EURO-LOCK A.27.60 cures anaerobically between metal surfaces. For passive materials, no activator is needed. For non-passive materials, an activator can support the curing process.

Yes, the EURO-LOCK A.27.60 is designed for a temperature range of -60 °C to +200 °C and withstands high temperatures.

Yes, for disassembly the bond must be heated to approximately 250 °C. Alternatively, it can also be mechanically removed.

The glue reaches initial strength at room temperature in 2 to 6 minutes. You can then carefully touch the screw.

The A.27.60 is designed for a wide temperature range from -60 °C to +200 °C. It ensures high stability even in extreme conditions.

The red color signals the glue's high strength and facilitates visual checks of secured connections.

The glue should be stored cool, dry, and protected from light at temperatures below 21 °C. Opened bottles should be used soon.

Yes, EURO-LOCK A.27.60 has a wide temperature range from -60 °C to +200 °C and thus holds even in extreme cold.

High-strength connections with A.27.60 can be loosened by heating to approximately 250 °C. Alternatively, mechanical disassembly is also possible if heating is not practical.

Yes, for optimal effectiveness, threads and surfaces must be thoroughly cleaned, degreased, and dried before application.

You can accelerate the curing of EURO-LOCK A.27.60 by targeted heating. This helps achieve hand strength and functional strength faster if your application requires it.

The range depends heavily on the screw size and the amount applied. A 50g bottle lasts for several hundred medium-sized screws. (Approximately: For M10 screws, about 0.1-0.2g per screw is needed, which would correspond to about 250-500 screws.)

The full final strength of EURO-LOCK A.27.60 is achieved after 8 hours at room temperature. Hand strength is achieved after just 2 to 6 minutes.

The EURO-LOCK A.27.60 is specifically designed for screws up to M36. It is not optimized for larger dimensions.

Yes, the adhesive is optimized for screw sizes up to M36 and is therefore also ideal for M8 screws.

Yes, the adhesive provides high shear strength and is resistant to vibrations. It effectively prevents loosening under dynamic loads.

Yes, the A.27.60 offers high resistance to various chemicals and media. This typically includes oils and coolants.

Yes, the adhesive provides a high-strength bolt securing, designed for permanent and secure connections. It is also resistant to vibrations and corrosion.

Yes, for non-passive materials like lightly oxidized or galvanized surfaces, the use of an activator is recommended to ensure optimal adhesion and curing of A.27.60. This way you achieve the full high-strength connection.