Shower cubicle cleaner, 650 ml

Yes, the cleaner is suitable for use on faucets. It removes limescale and soap residue while protecting the surfaces.

The surface should be moistened beforehand. During the exposure time, the cleaner should remain on the damp surface.

The shower cubicle cleaner should be stored in a cool, dry place. A bathroom cabinet that meets these conditions is suitable, but always keep it out of the reach of children.

No, the recommended exposure time of 2-5 minutes should not be exceeded. In the case of heavy soiling, it is recommended to repeat the cleaning process instead.

The product offers long-term protection and is dirt-repellent. This can reduce the cleaning intervals for your shower enclosure, as the surfaces stay clean longer.

Yes, the cleaner repels dirt, dust, and water. This significantly reduces the formation of new water stains and deposits.

Yes, the product brings back lost shine to your shower walls. After application, the surfaces look radiant again.

The cleaner is suitable for use on tiles and removes soap and limescale residue. It can therefore also be used to clean the joints.

Yes, the low-acid formula of the cleaner is specially designed to reliably remove limescale deposits. In very stubborn cases, the application can be repeated.

The exact number of applications depends on the size of the shower cubicle and the degree of soiling. Roughly speaking, the 650 ml is enough for about 20-30 applications.

Yes, the cleaner is gentle on sensitive surfaces such as acrylic and can therefore be used without hesitation on acrylic shower trays.

Yes, the shower cubicle cleaner completely removes soap residue. The special formula also reliably dissolves more stubborn deposits.

For long-lasting protection and a permanent beading effect, regular use of the cleaner is recommended. The frequency depends on individual use and water hardness.

The cleaner is suitable for radiant surfaces in shower enclosures. It effortlessly removes limescale and soap residue and leaves a beading effect.

The cleaner is skin-friendly when used correctly. Nevertheless, direct skin contact should be avoided and in case of contact, rinse thoroughly with water.

Yes, the shower cubicle cleaner is also suitable for fittings and protects sensitive surfaces such as chrome. It is skin-friendly and material-friendly when used correctly.

The recommended exposure time is 2-5 minutes. For lighter soiling, 2 minutes may be sufficient to achieve good results.

No further wiping is necessary after thorough rinsing. The cleaner prevents streaky residue.

Yes, the surface should be moistened before applying the cleaner. This ensures optimal distribution and effectiveness of the product.

Yes, the shower cubicle cleaner removes limescale and soap residue effortlessly. It is specially designed to dissolve even stubborn residue and clean surfaces.

Yes, the cleaner brings back lost shine and offers long-term protection. The surfaces therefore stay clean, radiant and are dirt-repellent for longer.

The cleaner is equipped with a brilliant beading effect. This effect provides long-term protection for shiny surfaces and is water-repellent.

The cleaner is skin-friendly and material-friendly when used correctly. However, it should be stored out of the reach of children.

The WF-1000506 is primarily designed as a shower cubicle cleaner. It removes limescale and soap residue and restores shine to surfaces.

No, a brush or sponge is not required to apply the cleaner. The product also works without mechanical support.

Yes, the brilliant beading effect minimizes stain formation by repelling water. This significantly reduces the formation of limescale and water stains.

Yes, the cleaner is material-compatible and protects sensitive surfaces such as acrylic and chrome. It is also suitable for other plastics on shower walls.

Correct, the WF-1000506 offers long-term protection for radiant surfaces. The dirt and water-repellent effect lasts longer and protects the treated areas.