Solar lamp with motion detector, set of 2

The motion detector provides ideal lighting as soon as movement is detected. In combination with the long-lasting LEDs, the set is well-suited for illuminating dark areas.

Absolutely. The solar lamp offers easy wireless installation. You don't need a socket or power cable and can therefore position the lamps very flexibly.

The built-in LEDs are durable and are characterized by low energy consumption. This enables efficient and sustainable operation of the solar lamps.

Yes, the PIR motion sensor offers a 120° wide-angle detection. This way, movements are reliably detected even in the side area.

Yes, the lamps are ideal for garden paths where you don't need continuous light. In sensor mode (mode 3), they only light up when movement is detected for about 17-20 seconds at full brightness and then switch off again.

The lights offer 3 different lighting modes to choose from, including settings that allow lighting only when there is movement or to switch off completely when needed.

Yes, the installation of the lamps is wireless and easy to do. You don't need any power cables or complicated tools.

Yes, the solar lamp is waterproof, dustproof, shockproof and heat-resistant. It is designed for use under various weather conditions.

Yes, the lamps are waterproof, dustproof, shockproof and heat-resistant. They are therefore suitable for year-round outdoor use under various weather conditions.

The solar lamp has 3 integrated light modes. The selection and switching of the modes is usually done via a small switch on the housing of the device.

The lamps offer 3 different lighting modes to choose from. You can select a mode that only lights up when there is movement, or switch off the device if necessary via the integrated switch.

Both solar lamps in the 2-piece set are identical in function and construction. Since they are solar-powered and wireless, you can choose the distance individually depending on the desired lighting area and local conditions.

Yes, the solar lamps are equipped with long-lasting LEDs. These are also characterized by low energy consumption.

Yes, the solar lamp is waterproof and dustproof. It is therefore ideal for mounting on the house wall or similar outdoor areas.

Yes, the solar lamp is waterproof, shockproof and heat-resistant. Its robust construction allows it to be used even in adverse weather conditions.

Yes, the PIR motion sensor with its 120° wide-angle detection ensures ideal lighting as soon as you enter the detection area. The path will be reliably illuminated.

The PIR motion sensor detects movement in a wide-angle range of 120°. This means that movements are reliably detected even to the side of the lamp.

Full brightness is activated in modes 2 and 3 and illuminates for approx. 17-20 seconds when motion is detected. After that, the lamp switches back to dimmed light intensity or turns off completely, depending on the selected mode.

Yes, the solar lamp is designed to be shockproof. This contributes to its robustness and protects it from minor impacts or falls.

The solar lamps are designed for easy wireless installation. This means that the assembly is straightforward and quickly done, as no power cables need to be laid.

With 120 lumens, the solar lamp provides sufficient brightness to safely illuminate dark areas such as garage entrances. It provides clear and temporary illumination upon movement to avoid tripping hazards.

The set is designed to be heat-resistant as well as water- and dustproof. This ensures reliable function even in changing temperatures and winter conditions.

The solar lamp uses daylight for power. For an optimal lighting duration of 4-6 hours in mode 1, the battery should be charged in direct sunlight for 7-8 hours during the day. In shady areas, the charging power may be reduced.

No, the solar lamps are designed for easy wireless installation. They do not require an external power connection as they are solar powered.

The integrated motion detector provides automatic lighting when motion is detected. This can surprise unexpected visitors and thus offer an additional security feature.

Yes, the lamp is designed for multiple movements. In mode 2 or 3, it lights up at full brightness for about 17-20 seconds with each detected movement. The total running time depends on the frequency of the triggers and the previous charging time.

Yes, the solar lamps are waterproof and dustproof. In addition, they are shockproof and heat-resistant, which ensures their robustness outdoors in various weather conditions.

Yes, the built-in LEDs are durable and are characterized by low energy consumption. This ensures a long service life of the solar lamps.

The set offers 3 different light modes to choose from. These allow the lighting to be adjusted, with the motion detector primarily ensuring ideal, demand-oriented lighting.

Yes, the solar lamp set offers 3 different lighting modes to choose from. With these, you can flexibly adapt the light behavior of the lamp to your needs.