CV jigsaw blade, cross-ground and set, GL 150/VL 130 mm, ZT 4.0 mm/ 6 TPI, pack of 5

The saw blade is optimized for very fast and rough cuts in wood materials such as plywood or chipboard. For parquet, where a very clean, tear-free cut is crucial, the coarse toothing of 6 TPI is rather unsuitable.

Yes, the high-quality chrome-vanadium steel (CV) guarantees a long service life and high load capacity. The pack of 5 also ensures that you always have a spare blade at hand.

The saw blade is intended for very fast and rough cuts in wood materials such as chipboard. For laminate floors, where clean, tear-free edges are important, the 4.0 mm tooth pitch could be too coarse.

Yes, the blades are versatile for wood. Their robust teeth also ensure a long service life for various types of wood.

The saw blades enable very precise cuts thanks to the cross-grind. The set teeth also support clean guidance in the material.

Yes, the saw blades can be used versatilely for wood and plastic. The cross-grind enables precise cuts also in plastics.

The 5-pack is designed for a longer service life and offers a good supply. So you always have enough replacements on hand.

The saw blades have a robust toothing that ensures a long service life. They are designed for a longer period of use and thus for maintaining the cutting performance.

Yes, the CV jigsaw blade is suitable for floorboards. It is designed for softwood and construction timber and processes material thicknesses from 5 to 100 mm.

No, you can use the CV jigsaw blade in all common jigsaws with a T-shank. This is the most common saw blade holder type.

Yes, the saw blades are characterized by a long service life. This is due to the robust toothing, which is designed for permanent use.

Yes, the CV jigsaw blade is specially developed for construction timber and softwood. It is ideal for fast and rough cuts in materials with thicknesses from 5 to 100 mm.

Yes, the CV jigsaw blade is designed for material thicknesses from 5 to 100 mm. It is therefore well-suited for wooden beams up to a thickness of 10 cm.

The saw blades are versatile for wood and plastic. They are therefore also very suitable for repairs to plastic garden furniture.

This saw blade is designed with its coarse teeth (4.0 mm / 6 TPI) specifically for very fast, rough cuts in wood. For visible edges that require a high surface quality, the blades are therefore less suitable. They achieve the best results with concealed cuts in materials up to 100 mm thick.

Yes, the 5-pack is ideal for home use, as you will always have spare blades available. Thanks to the robust CV steel, the blades have a good lifespan, even with regular use.

The precise cuts are due to the cross-grind. A tooth size of 6 TPI offers a good balance for various woodworking jobs, including thinner plywood.

The jigsaw blade is designed for very fast straight and rough cuts. It offers precise guidance, but for very fine, visible edges on furniture, blades with finer teeth are recommended to minimize tear-out.

Yes, the CV jigsaw blade is explicitly suitable for MDF and enables fast, straight and rough cuts. It is designed for material thicknesses of 5-100 mm.

Yes, the set teeth ensure perfect control when sawing. This also facilitates precise curve cuts and maneuvering in the material.