CV jigsaw blade, cross-ground and set, GL 100/VL 75 mm, ZT 4.0 mm/6TPI, pack of 5

Yes, the saw blade is explicitly suitable for chipboard and enables very fast cuts. It delivers excellent cutting performance.

Yes, this saw blade is specially designed for very fast cuts in materials like kitchen worktops. The tooth pitch of 4.0 mm (6 TPI) allows for rapid work progress.

Yes, the CV jigsaw blade is suitable for kitchen worktops up to 50 mm thick. The cross-ground toothing enables fast and precise cuts, even with long straight runs. It offers good control.

The maximum cutting depth of this saw blade corresponds to the tooth length of 75 mm. With this you can cut panels up to this depth.

Yes, the saw blade offers maximum control and is designed for handymen and DIY enthusiasts with high demands. The toothing ensures minimal friction and good guidance.

Thanks to the robust toothing, the saw blades offer a long service life. The pack of 5 also ensures a longer period of use before a change is necessary.

Yes, the set teeth of the saw blades allow perfect control during the cut. This is advantageous if you also want to saw curves precisely.

The set contains 5 identical CV jigsaw blades. It is a pack of the described blade type for a longer period of use.

The saw blades are characterized by a long service life thanks to the robust toothing. How long exactly each blade lasts depends heavily on the material and use. However, the pack of 5 ensures a longer readiness for use.

Yes, the saw blade is suitable for softwood and construction timber. Rough cuts in wood, as they occur with pallet wood, are also possible without any problems.

Yes, this saw blade is designed for material thicknesses from 5 to 50 mm. A wooden panel with a thickness of 45 mm can be processed with it.

The blades can be used for a variety of plastics. With a tooth length of 75 mm and robust teeth, they are also suitable for materials such as PVC pipes.

Yes, the saw blade is also suitable for MDF boards. The cross-ground and offset toothing ensures good performance in this material.

These CV jigsaw blades are intended for standard jigsaws with the appropriate mount. Please check the compatibility with your jigsaw.

Yes, the saw blade is designed as a curve blade specifically for rough curve cuts in softwood. The practical 5-pack provides sufficient replacements.

Yes, the saw blade is designed for multiplex panels and reliably processes material thicknesses up to 50 mm. The chrome-vanadium steel ensures high load-bearing capacity.

The saw blades are designed for use in plastic materials. The cross-grind enables precise cuts, which is also an advantage for Plexiglas.

Yes, the saw blade is intended for processing carpenter's boards. It ensures a fast and exact cut in this material.

Yes, the saw blades enable precise cuts thanks to the cross-grind. The set teeth also offer perfect control to minimize fraying.

Yes, these saw blades are well suited for woodworking such as shortening a door. The cross-grind ensures precise cuts and the set teeth provide good control.