Watering cones including cup "Hydro Cup" set of 4

The components of the "Hydro Cup" system are robust and functional. A simple cleaning of the clay cones under running water should be sufficient to remove soil deposits.

The Hydro Cup was developed for a stable fit of commercially available PET bottles (0.5l to 1.5l). The special adapter cup ensures that the bottles stand securely and upright even with larger volumes.

Yes, the "Hydro Cup" system is versatile for different plant species in the raised bed. It ensures uniform moisture at the roots through controlled diffusion.

The Hydro Cups are suitable for both indoor and outdoor use. You can easily use them for your houseplants, on the balcony or in the garden to ensure even watering.

The Hydro Cups are made so that standard PET bottle necks can be stably attached. For maximum stability, especially with larger bottles, leaning against the edge of the pot can be helpful.

Yes, that's one of the big advantages of Hydro Cups. They only release water to the soil when needed. This ensures the plant is optimally supplied and overwatering from watering too often is effectively prevented.

The Hydro Cups release water as needed, depending on the soil moisture. For very sensitive plants or those with special substrates, it is recommended to regularly check the soil moisture at the beginning to ensure the ideal amount of water.

The frequency of filling the cups depends on the water requirements of the plants and the ambient conditions. The system is designed to enable a stress-free supply even during longer absences such as vacations.

The handling of the Hydro Cups is very simple. You simply fill a standard PET bottle with water and place it upside down in the supplied adapter cup on the clay cone. It's quick and easy.

The application is child's play: The clay cones are simply inserted into the raised bed and the cup attachments are filled with water. No complicated installations or preparations are necessary.

The "Hydro Cup" system has been specially developed for the care of raised beds. It ensures an optimal and targeted water supply there.

Yes, the irrigation cones are designed to deliver the water slowly and directly into the soil. Even with pots with drainage holes, the water is effectively directed to the plant and not immediately drained.

The system uses the innovative diffusion technology. Water is slowly and controllably released through the clay cones to the plant roots, so they get exactly the amount they need.

The Hydro Cups are primarily intended for standard PET bottles with standard threads. Glass bottles usually don't fit optimally due to their weight and often different neck shapes and could affect the stability of the system.

Since the Hydro Cups deliver the water directly to the roots and the soil surface can therefore remain drier, this is often helpful in preventing fungus gnats. A dry surface makes it more difficult for the gnats to lay eggs and for the larvae to develop.

The Hydro Cups are designed for longevity and can be used over several gardening seasons with proper handling and care. Regular cleaning of lime and soil residues supports the function and durability of the material.

It is recommended to soak the clay cones in water for about 15-30 minutes before the first use. This ensures that the pores are fully saturated and the water can be released optimally immediately.

For larger potted plants with a diameter of 50 cm, a single watering cone is often not sufficient. We recommend, depending on the plant's water requirements, using two or more Hydro Cups per pot to achieve optimal distribution.

The irrigation cones are made of robust clay material. With normal use and careful insertion into the ground, they are very durable. Avoid inserting them into very hard, compacted soils without prior loosening.

The Hydro Cups are designed for use with bottles attached for continuous water delivery. Direct filling from the top is possible in the short term, but does not provide a sustainable watering solution.

The Hydro Cups also work in firmer or loamy soils that store water well. In very compacted soil, it can be helpful to pre-drill the planting hole for the cone a little to make insertion easier.

Make sure the cone has been well soaked beforehand. Check if the pores of the clay are clogged by earth or lime deposits. Also, a soil that is too wet will not absorb any more water at first.

The Hydro Cups are suitable for commercially available PET bottles from 0.5 to 1.5 liters. A 1-liter filling typically lasts between 3 days and 1 week, depending on the plant type, location, and weather conditions. (Roughly speaking: With moderate consumption, a 1-liter volume is sufficient for about 5-7 days.)

The refill intervals depend on the plant size, soil type and weather. A 0.5-liter bottle typically lasts for 3-7 days. For a balcony box, several irrigation cones are usually recommended, depending on the size and planting.

For optimal water distribution, we recommend placing the Hydro Cup more in the middle of the pot, as close as possible to the root ball. For very large pots, it may be useful to distribute the cones of a set evenly.

The watering duration depends heavily on the size of the bottle used, the plant's water needs, and the environmental conditions. For longer absences, you should choose larger bottles and test the watering duration in advance.

No, the Hydro Cups should not be left outside in freezing temperatures. The clay material can crack or break in sub-zero temperatures and freezing water. Store the set in a dry and frost-free place in winter.

An occasional cleaning of the clay cones is recommended to avoid possible deposits or blockages from soil or limescale. Simply rinse the cones under clear water.

The Hydro Cups are designed to stand stable even in smaller pots. With a diameter of 15 cm, the cone should fit well. Make sure to stick it deep enough into the soil so that it can release water optimally.

For a tree planter with a diameter of 80 cm, it is recommended to use several Hydro Cups to ensure even watering of the entire root zone. Two to three cones, depending on the plant type and water requirements, would be a good starting point.