Gutter protection grille, plastic up to RG150, length 3m, 12 clips

The grid segments are easy to attach afterwards and can be mounted without special tools. Removing for cleaning and subsequent reattachment is therefore straightforward.

The assembly of the safety grid is described as 'easy and safe' and can easily be done from the ladder. No special tools are needed, as the clips allow for quick attachment.

The protective grid significantly reduces the accumulation of leaves and dirt in the gutter. The frequency of the necessary cleaning work is thereby greatly reduced, but an occasional check is still recommended.

The protective grid is made of sturdy, high-quality plastic and withstands wind and rain. The 12 included variable retaining clips ensure a secure and firm attachment to the gutter, even in strong gusts of wind.

Yes, the protective grid is suitable for all standard gutters with a round bead up to RG150. This means it also fits smaller gutters like RG125.

The protective grid is designed for gutters up to RG150. Thanks to the flexible plastic, it adapts well to different gutter shapes and is attached with clips.

For optimal function and to avoid complex cleaning in the long term, we recommend thoroughly cleaning the gutter before installing the protective grid. This way, you start with a clean and functioning system.

The mounting of the protective grille depends primarily on the shape and accessibility of the gutter, not directly on the type of tile. As long as the gutter is freely accessible and the bead for attaching the clips fits, it can be used.

The protective grid prevents leaves and larger dirt particles from entering the gutter. A basic cleaning before installation is recommended, after which the gutter remains largely clean.

The protective grid is made of sturdy plastic and withstands the usual weather conditions, including snow and ice. It helps prevent the gutter from clogging with frozen leaves.

Yes, the 12 clips are sufficient for a secure attachment of the 3-meter long protective grid. They ensure a firm hold, even in windy conditions.

The mesh size of the grid is 8 x 8 mm. This size is designed for optimal water drainage while minimizing the risk of clogging.

Yes, the complete package of the protective grid includes 6 segments, which together cover 3 running meters. So it is exactly enough for your 3 meters of gutter on the shed.

The protective grille is designed for gutters up to RG150. The flexible plastic material can be easily cut to the desired size with scissors or a knife if needed.

The assembly is very easy thanks to the short 0.5 m segments and the variable holders and can be carried out safely from a ladder. No special tools are required, which makes handling easier.

The protective grid covers the gutter and protects it from animals. However, a gap between the gutter and the roof tiles is not closed by the grid.

The protective grid is made of sturdy plastic to withstand normal loads. It reliably keeps out lighter branches, but damage can occur with larger or heavy falling branches.

The assembly is easy from a ladder and can be done well alone. No special tools are required, the fastening is done quickly with the variable retaining clips.

Yes, the protective grid is made of sturdy plastic and withstands wind and other mechanical stresses. The 12 variable retaining clips per 3-meter set ensure a secure hold on the gutter.

The scope of delivery includes 12 clips for the 3-meter protective grille. This ensures easy and safe assembly and a stable hold, as this corresponds to one clip per 25 cm of grille length.

The protective grid effectively keeps leaves, needles, animals and balls away. Due to the hole size of 8 x 8 mm, very fine seeds or pollen may slip through, but the majority of the dirt will be retained.

The grid is made of high-quality, stable plastic with a material thickness of approx. 2.7 mm. It is designed to withstand wind, rain and mechanical stress and is discreet and corrosion-free.

The protective grille is designed to effectively keep out leaves and needles. The hole size of 8 x 8 mm is optimal for retaining most fir needles while ensuring water drainage.

The protective grille is designed to be effective against leaves and larger animals to prevent clogging. Smaller needles may, under certain circumstances, pass through the grille, but the amount that would clog the gutter will be greatly reduced.

For a 15-meter rain gutter, you will need five of these sets. Each package contains 6 segments of 0.5 meters, which corresponds to a total length of 3 running meters – that's enough for about 3 m per set.

Yes, the protective grille effectively keeps animals such as birds and mice away from the gutter, thus preventing nesting sites or hiding places. The 8x8 mm hole size does not allow larger animals to pass through.

The grille is primarily designed to protect against leaves and larger animals. Smaller particles such as very fine seeds or pollen may still be able to pass through the mesh.

Yes, the protective grille is made of sturdy plastic that is designed for long-term outdoor use and withstands weather conditions well.

The protective grid is flexible and can be adapted well. The supplied clips allow for secure mounting, even if the roof tiles protrude a little over the gutter.

Yes, the plastic protective grid can be easily cut with scissors or a knife if needed. This way you can also adapt it to corners or other individual gutter runs.