Surface protection sealant - 2000 ml canister

Yes, the sealant offers protection against moisture. It is suitable for outdoor use and provides permanent protection.

Yes, the surface protection permanently protects facades from moisture, rainwater and other chemicals. It forms a durable layer against weather influences.

WF-161281 is suitable for all mineral surfaces. However, with very smooth, non-absorbent surfaces such as polished granite, the adhesion and thus the protective effect can be impaired. The yield also depends heavily on the absorbency.

Outdoors, the sealed surface must be protected from moisture for 24 hours. During this time, it should also not be walked on to ensure optimal drying.

A 2-liter canister is sufficient for approximately 15-20 m² of surface area, depending on the absorbency of the substrate. For 30 m², you therefore need at least two canisters (roughly calculated: about 1.5 to 2 canisters per 30 sqm).

Yes, the sealant is salt water resistant. It can therefore be used on surfaces that come into contact with salt water.

Yes, the sealant can be applied to older patio slabs. It is important that the surfaces are thoroughly cleaned before application.

No, the sealant is visually neutral. It does not change the appearance of your natural stone tiles and forms an invisible protective layer.

Yes, the product offers protection against dirt and moisture. This significantly reduces unsightly water stains on the patio after rainfall.

The sealant offers permanent protection. It is also salt water resistant and insensitive to chemicals, which ensures high resistance under stress. An exact renewal frequency depends on the specific stress.

The sealant is easy to apply. Special tools or complicated techniques are not necessary for this.

The sealant is designed so that the treated surface remains visually neutral. No visible film is formed, and the original appearance of your terracotta pots is not changed.

Yes, the surface protection prevents the adhesion of algae and dirt, which also reduces moss formation on garden slabs. The surfaces stay clean longer.

The sealant offers permanent protection. This means it is designed for a long-lasting effect without the need for frequent re-treatment.

Yes, the product prevents dirt and other contaminants such as leaves from settling. The surfaces stay clean longer.

Yes, the sealant is characterized by easy application.

The sealant is resistant to chemicals. It therefore offers protection against many cleaners and other chemical influences.

One canister of WF-161281 is sufficient for 15 to 20 m². For your 35 sqm terrace you need at least two canisters. (Roughly calculated: At full yield of 20 m²/canister, two canisters cover 40 m²).

The WF-161281 protects concrete permanently against moisture and wastewater. Note that the sealant is not breathable.

The surface protection is intended for cleaned surfaces and serves to prevent new soiling and discoloration. It has no cleaning or brightening effect on existing discoloration. Please clean the slabs thoroughly before application.

The surface protection is primarily designed to protect against dirt and moisture and keeps the surface visually neutral. No specific anti-slip properties are indicated. Therefore, caution is still advised when wet.

The product offers permanent protection against moisture and is salt water resistant. Therefore, it is also suitable for use in wet areas such as a shower.

Yes, the sealant offers effective protection against dirt. It helps to keep surfaces clean for longer and makes cleaning easier.

Yes, the product offers protection against moisture. It can therefore also be used to seal damp basement walls.

Yes, this sealant is resistant to chemicals and provides protection even when in contact with more aggressive cleaning agents.

The surface protection is suitable for basement walls and concrete against moisture. However, note that this nano-based sealant is not breathable.

Yes, the sealant is paintable. You can easily apply another coat of paint or a finish after it has cured.

Yes, the sealant is salt water resistant. It is ideally suited for use in coastal regions and when in contact with salt water.

Yes, a canister WF-161281 is enough for 15 to 20 sqm. For 10 sqm you could therefore apply the product twice. (Roughly calculated: For 2 coats on 10 sqm you need approx. 1000-1333 ml.)

The 2000 ml canister has a yield of 15 to 20 m². For your 18 m² area, the product should be sufficient.