8 mm fine wire tacker staples, 1000 pieces, thickness 0.7 mm

The WF-180463 staples are specially developed for sensitive materials such as fabrics and upholstery. Their fine wire quality and precise penetration depth minimize the risk of visible damage to the surface.

The 8 mm fine wire staples are designed for a low risk of jamming. Make sure you load them correctly into the stapler and clean the stapler regularly to achieve optimal results and prevent problems.

Yes, for 20 meters of fabric edges that you want to tack every 5 cm, you will need about 400 staples. The pack of 1000 pieces is more than sufficient for this. This corresponds to about two and a half times your requirement.

For optimal and permanent fastening, stapling at a 90-degree angle is recommended. This ensures the best hold and the precise penetration depth of the 8 mm fine wire staples.

Yes, the fine wire staples with a thickness of 0.7 mm are well suited for precise fastening of delicate materials such as silk fabric on wood. They leave smaller puncture holes than thicker staples.

Correctly, these fine wire staples with a thickness of 0.7 mm are primarily designed for softer materials such as wood, fabric or foils. They are not designed and not stable enough for piercing sheet metal or very hard plastics.

Yes, the 8 mm fine wire staples are ideal for upholstery work such as reupholstering a bench and also suitable for thin wooden strips. Their 0.7 mm thickness ensures precise and stable fastenings in softer materials.

To avoid corrosion damage, the clamps should be stored in a dry and cool place. An unheated garage can be too humid under certain circumstances; dry storage is important here.

The clamps are suitable for both DIYers and professionals and offer high reliability. Their easy handling and low risk of jamming make them suitable for occasional and permanent use.

The staples have a width of 10.7 mm and are designed for standard staplers. They should also fit in devices that are designed for 10.6 mm wide staples.

Yes, the 8 mm fine wire staples are well suited for light fixings such as thin carpet edges. Their small thickness ensures a strong hold without excess and protects the material.

Yes, the pack of 1000 staples is easily enough for that. With 3 staples per element, you need 450 pieces; that's about 45% of the total quantity.

The fine wire quality of 0.7 mm and the precise penetration depth minimize material deformations. The clips are therefore well suited for sensitive materials such as thin fabrics or paper to reduce traces.

These fine wire staples are suitable for many common tackers of this type with a width of 10.7 mm. Please check the specifications of your tacker model for exact compatibility with 8 mm length and 0.7 mm thickness.

The fine wire clips are generally easier to remove from wood than thicker clips due to their small thickness. However, smaller traces in the material may remain depending on the type of wood.

Yes, the stapler setting can be easily adjusted by testing on a test piece. This way you can find the optimal penetration depth for different materials such as fabric, cardboard or thin wood.

Yes, the 8 mm fine wire staples are suitable for thin veneers thanks to their reduced thickness of 0.7 mm and precise penetration depth. They minimize material deformation and protect sensitive surfaces.

The fine wire clips are made of robust material, but are not explicitly designed for permanent outdoor use with direct exposure to the weather. They are suitable for temporary fixings or protected areas, but rust can occur with prolonged moisture.

With 1000 staples, you can realize about 250 picture frame projects with four staples per frame. That corresponds to a large number of smaller craft projects.

Yes, for light craft projects in soft wood, these fine wire staples are a good alternative to small nails. They offer a quick and secure fastening.

Yes, these fine wire staples with a thickness of 0.7 mm are suitable for the precise attachment of thin materials such as plastic film to soft wooden frames. The robust material ensures stability and prevents tearing.

Thanks to the small wire thickness of 0.7 mm, these fine wire staples are rather inconspicuous after being driven into materials such as fabric or thin wood. They offer a discreet fastening.

Yes, the 8 mm fine wire staples are designed to have a low risk of jamming in the stapler. This ensures high reliability even with repeated or longer use.

Yes, the fine wire tacker staples are ideal for DIY enthusiasts and versatile. They are well-suited for light upholstery work or for fixing decorative material to wood or drywall walls.

Yes, the high reliability of the staples in repeated use makes them ideal for serial work. They enable efficient and precise fastening of many identical decorative elements.

Thanks to their sharp edges, the clips allow for quick and clean stapling with electric or hand tackers. This is significantly more efficient and time-saving than manually attaching nails.

The 8 mm length of the staples is usually sufficient to securely attach a thin felt mat to chipboard. The robust material properties ensure a stable hold.

Yes, the 8 mm staple length is sufficient for attaching thin cables or light hoses to wooden strips. The 0.7 mm fine wire thickness ensures gentle fixing.