Alu Polyamidfaden (Nylonfaden), 2,4 mm, 90 m, 6-kant

Yes, this thread is also optimal for dense growth. It offers precise cuts and high flexibility, even for tight curves and demanding areas.

Special storage is not mandatory for this thread. Simply store it dry and protected from direct sunlight to optimally preserve the material properties.

Yes, the increased durability due to the six cutting edges and the high tensile strength of the thread significantly reduce the frequency of reloading. This enables longer, uninterrupted work.

Yes, the 6-sided shape of the aluminum polyamide thread provides a sharper cutting edge. This enables a more efficient and cleaner cut, especially with denser growth the difference is noticeable.

The thread is designed for processing weeds and dense wild growth and offers high resilience. However, you should proceed with caution with very heavily wooded growth.

The 90 m thread on this roll is sufficient for numerous thread changes. If your trimmer needs about 10 m of thread per filling, you can refill the spool about 9 times. (roughly calculated: 90 m / 10 m per filling = 9 fillings).

The aluminum polyamide thread with a diameter of 2.4 mm is robust and flexible. It is well suited for precise work on beds, whereby the handling of the trimmer and the distance to obstacles are crucial to avoid unnecessary wear.

The 6-sided thread is particularly efficient at cutting due to its sharp edges. It enables a clean cut even with tougher grass and finer growth, which reduces 'smearing'.

Yes, the 6-sided thread is designed for excellent cutting and precise results. The six cutting edges enable clean edges without cracking, which results in a visibly better cut.

No, that is not necessary with this aluminum polyamide thread. The material does not absorb water and wetting would not improve the cutting properties of the thread.

The 90 m length in combination with the high tear and abrasion resistance of the 6-sided profile significantly reduces the frequency of reloading. With regular use in a private garden, one roll should be sufficient for a long time, often over several seasons.

Yes, the thread enables precise cuts and clean edges without cracking. This also makes it suitable for fine work on bed edges.

The 6-sided thread is ideal for demanding mowing of grass, weeds, and wild growth. Its six cutting edges ensure precise cuts and high performance.

The incorporated aluminum particles increase the cutting force and improve the abrasion resistance of the thread. This makes the trimmer thread more stable and wears out slower than pure nylon threads.

Yes, the aluminum polyamide thread with its 6-sided shape and material composition is specially designed for efficient cutting. It is suitable for taller grass and also for stronger, herbaceous weeds.

The aluminum polyamide thread is known for its high tensile strength and good abrasion resistance. Therefore, it withstands short contacts with hard surfaces better than conventional standard threads.

The 90 m thread length is sufficient for many new fillings. If a typical spool takes about 3-5 meters of thread, the roll allows for about 18-30 spool fillings – that corresponds to several seasons for a normal gardener.

For best results, it is recommended to use the thread at the trimmer's medium speed. On stony ground, you should proceed slowly and carefully to avoid damage.

The 6-sided thread is designed for demanding mowing work and creates precise cuts on grass, weeds and wild growth. Its maximum cutting performance is also suitable for stronger growth, but the efficiency can decrease with already woody plants.

The thread should be stored dry and cool and protected from moisture to maintain its dimensional stability. Remove residues after use to avoid blockages.

The aluminum-polyamide thread is specially designed for high load capacity on contact with hard surfaces such as fences or stones. It offers high tear resistance and abrasion resistance.

With the 90 m roll, you can refill your trimmer about nine times if your spool has a typical capacity of around 10 meters of line. This gives you a good supply for the season.

The aluminum polyamide thread (nylon thread) in 2.4 mm thickness and 6-sided shape is generally very robust. Its composition and shape are designed for high resistance in use. This makes it also well suited for longer use with dense vegetation.

No, this trimmer line is primarily intended for grass, weeds and light growth. For thicker branches or wood, we recommend special saw blades or brush cutters with a knife attachment.

Yes, the thread is also suitable for frequent contact with hard surfaces such as kerbstones or walls due to its high load-bearing capacity. Its high tensile and abrasion resistance are an advantage.

This thread is suitable for most commercially available grass trimmers and brush cutters that are designed for a thread diameter of 2.4 mm. Please check the specifications of your device.

The thread is particularly robust and resistant on contact with hard surfaces thanks to its aluminum coating and 6-sided profile. On stony ground, the resilience is high, but it is recommended to proceed slowly to avoid damage.

Thanks to the optimized 6-sided shape and the robust aluminum-polyamide material, this thread is more resistant and does not wear out faster than a good round thread. The rewinding frequency depends heavily on the vegetation to be processed.