Grinding stone 100 x 20 x 16 mm for grinding machine No. 951099

Yes, the product category "Metal Grinder" indicates suitability for metal work. Removing rust on metal is a typical application for this grinding stone.

Yes, the grinding stone has a diameter of exactly 100 mm. This corresponds to the standard dimensions for many bench grinders.

The grinding stone is designed for shafts with a diameter of 16 mm. With a 15 mm shaft, a secure and centered hold cannot be guaranteed.

Yes, this grinding stone also has a diameter of 100 mm. The dimensions are 100 x 20 x 16 mm.

Yes, the grinding stone is well suited for metal tools. Sharpening and deburring tools made of metal is a common application for this product.

Yes, this grinding stone is specifically designed for use with the grinding machine No. 951099. The dimensions are optimally matched to it.

Yes, the mounting of the grinding stone is straightforward. It is simply placed on the 16 mm shaft of your grinding machine and secured.

Yes, the grinding stone has a 16 mm bore. It therefore fits on corresponding machines with a 16 mm shaft.

Yes, this grinding stone has a 16 mm bore and therefore fits on grinders with a corresponding shaft.

Yes, the grinding stone is suitable for processing metals such as cast iron. It can be used for grinding and deburring.

Yes, the grinding stone is suitable for sharpening dull metal tools such as axes. It is designed for metalworking.

The stone is designed for general grinding work on metal. It can also be used for smoothing smaller metal parts, provided they can be guided safely.

Yes, the grinding stone is suitable for sharpening drill bits made of metal. It is intended for general metalworking.

Yes, this grinding stone is designed for use on grinders. Make sure the dimensions 100 x 20 x 16 mm fit your bench grinder.

It is very important to let the grinding stone dry after use. This prevents corrosion and contributes significantly to a long lifespan. Always store it dry and protected from moisture.

The grinding stone is intended as a spare part for the grinding machine No. 951099. With a diameter of 100 mm and a width of 20 mm, it is suitable for general grinding work where these dimensions are suitable.

The grinding stone is designed for stationary use in a grinding machine. A 'head-over' mounting of the machine is not intended for safety reasons and is not recommended.

Yes, the grinding stone with a diameter of 100 mm and a width of 20 mm is in principle suitable for deburring work on metal parts. It is designed as an accessory for the grinding machine No. 951099.

Yes, the grinding stone is very good for deburring metal parts like wrenches. It is specially designed for metalworking.

Yes, this grinding stone is specially designed as a spare part for the grinding machine No. 951099. It has the exact dimensions of 100 x 20 x 16 mm, suitable for your device.

The grinding stone is designed for metalworking. Tools made of HSS steel can be ground with it.

The grinding stone is equipped with a 16 mm bore. It fits other grinders, provided their drive shaft also has a diameter of 16 mm.

The grinding stone has a diameter of 100 mm. It is suitable for surface treatment, but for very large surfaces or a quick treatment of a whole door, it could be relatively small.

No, this grinding stone is not intended for woodworking. The product category "Metal Grinder" indicates suitability for metals.

The stone is suitable for general metalworking and sharpening tools such as knives. There is no information on the grit.

Yes, the grinding stone can also be used for grinding aluminum. It is designed for processing various metals.

No, the grinding stone is not suitable for ceramic tiles. It is specially designed for metal work, as the category "Grinding machine metal" shows.

The grinding stone is intended for normal use in a metal grinding machine. For details on maximum continuous load or break recommendations, please consult the instructions for grinding machine No. 951099.

The grinding stone is intended for general metalworking. It can be used for different types of metal, provided they are not too soft (e.g. pure aluminum) or require special abrasives.

The grinding stone has a thickness of 20 mm, which offers good stability for a diameter of 100 mm. It is designed for normal use on the grinding machine No. 951099.