Impact wrench attachment for 18V Multi Power Tool

Yes, the high torque of 320 Nm and the impact action of the attachment are very effective for loosening stuck and rusty screw connections.

No, the attachment has a standardized ½" tool holder. No additional adapters are required for common sockets.

The impact wrench attachment is designed for daily, intensive use thanks to its robust construction and durable materials. It can withstand the stress of loosening many screws during restoration work.

The attachment is designed for powerful screwing and can screw larger bolts into concrete foundations, provided the appropriate 1/2-inch bits or sockets are used. The torque of 320 Nm supports this effectively.

Yes, the impact function with up to 2700 bpm and the high torque of 320 Nm are ideal for loosening stuck screws and nuts.

The maximum torque of 320 Nm is sufficient for most common M14 screws. However, pre-treatment may be necessary for very tight or heavily corroded screws.

The impact wrench attachment has a ½" tool holder. This is a standard size, so most common nut sets with ½" drive fit.

No, this attachment is exclusively designed for the 18 Volt 3in1 Multi Power Tool (Art.Nr. 600474) from Westfalia. Compatibility with other battery systems is not given.

Yes, with a maximum torque of 320 Nm, the attachment is sufficient for common wheel nuts on cars. It makes loosening and tightening much easier.

It is recommended to clean the attachment after each use and store it dry to avoid corrosion. Regular inspection for wear is also advisable.

The attachment is designed for good handling and control. The overall dimensions with the Multi Power Tool are comparable to those of a normal impact driver and allow use even in many hard-to-reach places.

Yes, the attachment offers excellent control and stability, which helps you work precisely even in heavy-duty applications. This minimizes risks in sensitive work and helps avoid damage.

Yes, the attachment offers with 320 Nm sufficient torque for reliably screwing in long and thick wood screws. The impact function effectively supports this.

Yes, the attachment is very suitable for quick dismantling work in the automotive sector, including exhaust screws, due to its high impact rate of 2,700 strokes per minute and a torque of 320 Nm.

Yes, the attachment is well suited for changing tires. However, it requires the 18 Volt 3in1 Multi Power Tool as a base unit, which you need to have ready for use at the campsite.

Yes, the attachment is suitable with its torque of 320 Nm and the impact rate for powerful screw work such as bolting in scaffolding. The robust construction supports use on construction sites.

The attachment is designed for demanding work with high torque. For critical applications on engine parts, always observe the manufacturer's torque specifications and, if necessary, use a torque wrench for checking.

The attachment is robustly built and designed for daily use, even with many screwing jobs in a row. Some heat generation is normal, but does not affect the function or service life with proper use.

Yes, with 320 Nm torque, the attachment can loosen and tighten the wheel nuts of smaller trailers. The ½" tool holder is compatible with most common wheel nuts.

Yes, the attachment is designed for demanding work and, with 320 Nm torque and the impact function, is also suitable for heavy assembly work in the metal sector.

The attachment offers 320 Nm of torque and 2,700 strokes per minute, which is sufficient for loosening wheel nuts on most tractors. It is important to use the appropriate 1/2-inch sockets.

The attachment with 320 Nm torque and impact function is well suited to loosen rusty or stuck wood screws. For an optimal result, you should use suitable ½" sockets.

Yes, the 2,700 strokes per minute significantly accelerate the screwing process of screws, especially with long wood screws or a larger number of fixings. This noticeably saves time and physical effort in series work.

Yes, with a torque of 320 Nm, the attachment is strong enough to loosen even stubborn stuck screws and nuts. This also applies to rusty connections on older machines.

Yes, with a maximum torque of 320 Nm, the attachment offers enough power for tightening and loosening large screws in constructions like carports or pergolas.

The 1/2-inch chuck is compatible with standard sockets. However, for full use of the 320 Nm torque and to avoid damage to the attachments, we recommend using reinforced sockets specifically suitable for impact wrenches.

The high impact rate of 2,700 impacts per minute significantly speeds up the work process and saves time. Therefore, the attachment is a very efficient aid for a large number of carriage bolts.

Yes, the high impact rate of 0-2700 bpm and the torque of 320 Nm are well suited to loosen stuck and rusty screws. For very stubborn cases, a rust remover can be helpful.