Wood stack holder, hot-dip galvanized

The hot-dip galvanized steel of the stacking aid is very easy to care for. Regular cleaning is generally not necessary.

A stack holder allows a maximum stack width of 2.6 m and a height of 1.3 m. With a wood receiving depth of 33.5 cm, a construction holds approx. 1.13 m³ of wood. For 3 m³ of wood, you therefore need about 3 pieces of these holders.

The stacking holder is designed for optimal fireplace wood storage. It offers a robust and stable base for your firewood, regardless of the amount or type of your fireplace.

The wood holder has a depth of 33.5 cm. Shorter logs that fall short of this depth may not be able to be fixed stably and should be selected according to the beam depth.

Due to the robust design and the concept for optimal firewood storage, the holder enables a stable stack. The shape of the logs has an influence on the individual stability.

The assembly is described as simple and can be done in a few minutes. No complex tools or excessive force are required, as only the spars are inserted into the openings.

The holder is designed for easy and quick assembly. This also makes it easier to move it around the garden later, if desired.

The holder is optimally designed for storing firewood. Its robust construction allows for the storage of a wide variety of logs.

The stacking aid is robustly made and specially designed for optimal firewood storage. It offers a stable base for your firewood.

Yes, the maximum width of 2.6 m is a recommendation for stability with long beams. You can also build the stacker with shorter beams and a correspondingly smaller width.

The stack holder is designed for standard square timbers. For the vertical posts you need cross-sections of max. 60x80 mm and for the horizontal posts max. 40x60 mm. These timbers are not included in the delivery.

Yes, the stack holder is made of hot-dip galvanized steel and is robust. This ensures high weather resistance for year-round outdoor use.

The maximum stacking height of 1.3 m is designed to ensure the stability and safety of the wood pile. Exceeding this height is not recommended to prevent tipping over.

The wood holder is designed for the natural shape of the wood and can also accommodate uneven logs. However, for optimal stability of the stack, the wood should be stacked as evenly as possible.

The maximum stacking height of 1.3 m refers to the stacked logs. The beams used can be correspondingly higher, but must be firmly connected to the stacking aid.

Yes, the stack holder is designed for storing firewood and fireplace wood. As long as the logs can be stacked stably and fit in the holder, the type of wood is not critical.

The vertical opening has the dimensions 60 mm x 80 mm and the horizontal opening is 40 mm x 60 mm. Suitable beams with these cross-sections are required for a stable construction.

The assembly of the log stack holder is easy and quick. No special tools are required to set up the stacking aid.

The holder is made of hot-dip galvanized steel and is robust, which guarantees a long service life. The easy and quick assembly also saves time.

The wood stack holder serves as the basis for storing firewood. The product description does not contain any information about the dimensions of square posts that can optionally be used. You can flexibly adapt them to your needs.

The holder should be mounted on a level surface to ensure maximum stability. Therefore, a direct setup on soil or gravel is not ideal, a firm and flat surface is preferable.

The holder protects the wood from ground moisture and promotes air circulation. However, for optimal protection from rain, storage under an eave or cover is recommended.

Yes, the stacking aid promotes air circulation around the wood and protects against ground moisture. For optimal drying and additional protection, it is recommended to store the stack under an eave.

The holder is made of hot-dip galvanized steel, which makes it extremely resistant to rust. The silver surface is retained in the long term.

Yes, the holder is made of hot-dip galvanized steel. This material offers optimal protection against the weather and is ideally suited for permanent outdoor use.

Yes, the stack holder also allows air circulation when stored against a house wall, which is important for drying the wood. For best results, storage under an eave is ideal.

The stacking aid is silver and offers a simple, functional look. It blends discreetly into various garden environments.

Yes, the wood stack holder is made of hot-dip galvanized steel and is characterized by a robust design. This guarantees high stability and durability during use.