Aluminum loading ramps, straight, 2 pieces

The ramp set is designed for motorcycles and other vehicles with high load capacity. A scooter with 100 kg can be loaded with it without any problems and safely.

Yes, the ramps are with a width of 21.5 cm also suitable for narrow motorcycle or moped tires. The perforated running surface provides good grip.

These drive-on and loading ramps are specially designed for the safe loading of vehicles. They are not intended for jacking up cars for maintenance work or an oil change.

Yes, the ramps are explicitly designed for loading wheelchairs. The perforated surface provides a secure grip.

The ramps are each 21.5 cm wide and the perforated surface offers good grip. This is usually sufficient for the tires of a wheelbarrow to load it safely.

The straight ramps can, under certain circumstances, serve as a temporary bridge for small steps. However, they are primarily designed for loading onto trailers or loading surfaces and must be secured accordingly.

The perforated aluminum tread is non-slip and provides a good grip even for solid rubber tires. It is specially designed for safe loading.

Yes, due to the high load-bearing capacity and the non-slip surface, the ramps are also suitable for loading or pushing up heavy furniture. Pay attention to an even weight distribution.

Thanks to the lightweight aluminum material, the ramps are designed for easy handling. This makes positioning and stowing easier.

With a length of 150 cm, the ramps offer a good basis for moderate inclines. The lower the height difference, the smaller the incline and the easier the driving.

With a width of 21.5 cm per ramp, most standard workshop trolleys fit well on it. The non-slip surface ensures a secure hold.

Since the ramps are made of aluminum, they are weatherproof and can also be stored outdoors. However, dry storage extends the life.

Yes, the ramps are ideal for safely and easily loading motorcycles and smaller vehicles like mopeds. Note the maximum tire width of 195 mm.

Yes, the ramps are suitable for various rolling objects. The non-slip perforated running surface ensures a secure hold during loading.

The aluminum material used is designed for high stability and durability. The high load capacity of 200 kg per rail confirms the robustness even with regular use.

Yes, the ramps are designed for loading various vehicles and equipment with wheels. The width of 21.5 cm per ramp is suitable for this.

The ramps are made of aluminum and are compact at 150 x 21.5 x 3.5 cm. Their material allows for easy handling and good stowage in the van.

Yes, the ramps are suitable for loading ride-on lawnmowers, provided the tire width does not exceed 21.5 cm per ramp. The perforated surface ensures a secure hold when driving on.

The ramps are intended for loading motorcycles, wheelchairs and construction machinery. For quads, the maximum tire width of 195 mm and the total weight of the vehicle per rail are crucial.

The length of 150 cm leads to a moderate slope with a typical loading edge (e.g. 60-70 cm). This is usually sufficient for easy lifting with a lawnmower.

The perforated, non-slip aluminum running surface is designed for a secure grip even when wet. Make sure the ramp ends are placed on a stable surface.

The ramps are 21.5 cm wide and offer a secure hold for vehicle tires. Loading e-bikes and also small bicycle trailers is therefore generally possible.

The ramps have a non-slip, perforated aluminum tread that ensures a secure hold. Always ensure that the ramps and trailer are stable.

Each ramp has a high load capacity of 200 kg. When using both ramps, they can carry loads of up to 400 kg.

The ramps have a non-slip, perforated aluminum running surface. This construction ensures a secure grip for the tires of the vehicle being loaded, even in damp conditions.

The ramps are 150 cm long. They fit in most station wagons or vans, you may have to fold down the back seats.

The maximum tire width per rail is 195 mm. Unfortunately, the ramps are too narrow for tires with a width of 205 mm.

Yes, the ramps are ideal for loading motorcycles. Each rail has a high load capacity of 200 kg.