Aluminum loading ramps, curved, 2 pieces

Yes, the ramps are suitable for e-bikes as long as the tire width is under 195 mm. The aluminum withstands the weight.

The aluminum ramps are designed for high loads and are also suitable for quads. The curved shape ensures a safe and gentle transition.

The ramps are suitable for wheelchairs, as they offer high load capacity and support a maximum tire width of 195 mm. The non-slip surface ensures additional safety.

The ramps are suitable for construction machines, provided the total weight does not exceed the maximum load capacity of 400 kg (200 kg per rail).

The ramps are made of robust aluminum material, which gives them a long service life. They are designed for frequent use and remain stable.

Yes, the ramps are easy to transport and store. Their design and the aluminum material contribute to handy storage.

Yes, the maximum tire width of 195 mm is not exceeded. The curved shape makes it easier to drive up.

Yes, as long as the tire width fits and the weight remains within limits. The curved shape helps with pushing up.

The perforated running surface of the ramps is designed to be non-slip to ensure good grip. For maximum safety, however, the ramps should always be aligned straight and parallel to the vehicle.

Yes, the ramps have a non-slip, perforated running surface. This design offers good grip even when driving up on slightly damp tires.

Yes, the ramps have a load capacity of 200 kg per rail, so a total of 400 kg when used in parallel. A quad with 350 kg can therefore be loaded safely.

The exact load capacity is not specified, but the high-strength aluminum is designed for heavy motorcycles and quads.

With a height of 3.5 cm, they are suitable for moderate loading edges. With very high edges, the incline could become steep.

The aluminum is corrosion-resistant and can be stored outdoors. Cleaning extends the lifespan.

The surface is designed to be slip-resistant, even when wet. However, for maximum safety, you should drive slowly and straight.

The edges are cleanly processed and pose no risk of injury. Aluminum is also easy to handle.

Yes, aluminum is light. With a length of 150 cm, they are still manageable and easy to transport.

Tie-down straps or similar can be used. The ramps themselves have no built-in fastening.

The ramps are suitable for construction machinery. However, with tracked vehicles, care must be taken to ensure an even weight distribution to avoid point loads that could damage the perforated surface.

The ramps are designed for a high load capacity of 200 kg per rail. A riding lawnmower can be loaded with them, provided the total weight is under 400 kg and is distributed over both ramps.

The ramps are designed for parallel use. A secure attachment or use one behind the other is not provided for due to their construction and is not recommended.