12 mm flat wire tacker staples, 1,000 pieces, 1.2 mm

The staples are stable and versatile thanks to the flat wire design. Their robust strength of 1.2 mm is suitable for various materials.

1,000 pieces are included, which is sufficient for many projects. The length of 12 mm is a frequently used and versatile size.

The staples are versatile for use with different materials. Their flat wire construction and 1.2 mm thickness provide a stable hold.

The flat wire staples are well suited for attaching light moldings to wood or similar surfaces. The 12 mm length provides sufficient hold for this application.

Yes, the 1.2 mm thickness ensures high robustness and resistance. The clips withstand mechanical stress and offer reliable fastening even with stronger pull.

Yes, the clips are versatile for different materials. The flat wire and the robust 1.2 mm thickness ensure stability.

Yes, the staples should be stored in a cool and dry place. This prevents deformation and protects the material from possible corrosion processes.

Yes, the 12 mm flat wire staples are also suitable for attaching felt sheets. They offer a stable hold without perforating the material too much.

The staples have a robust 1.2 mm thickness and can be used universally for various materials. The flat wire ensures additional stability.

1,000 pieces should be sufficient for 20 meters of light hose. At a recommended distance of approx. 20-30 cm, you need about 3-5 clips per meter. This corresponds to roughly 60-100 clips for the 20 meters.

Yes, the flat wire clips are very suitable for upholstery work and for attaching faux leather to upholstery frames. They offer a stable fixation in materials such as fabric and leather.

The staples are versatile and suitable for various materials. Their 12 mm length and robust 1.2 mm thickness provide a stable hold.

Yes, the flat wire construction of the staples ensures high stability and hold. The 1.2 mm thickness contributes to the robustness.

The staples have a length of 12 mm. This standard length is versatile and suitable for various materials.

For fixing carpets on standard carrier boards, the 12 mm staples are usually sufficient. The flat wire ensures good adhesion without damaging the material too much.

Flat wire provides increased stability and better penetration into materials. It offers a larger surface area that minimizes fabric tearing and ensures a firmer hold.

Yes, these flat wire staples have a width of 10.7 mm. They will therefore fit in your stapler, provided it is also designed for a staple length of 12 mm and a thickness of 1.2 mm.

The 12 mm flat wire staples can in principle be used for fastening light insulation boards on a wooden base. Please check the thickness of the insulation to ensure sufficient hold.

Yes, the robust 12 mm flat wire clips are well suited for fixing garden fleece on wooden frames of raised beds. Their stability prevents the material from tearing out.

Yes, the 12 mm flat wire staples are well suited for attaching chicken wire or similar wire mesh to wooden frames. The flat wire offers a wider bearing surface for better hold.

Yes, the 12 mm flat wire staples can also be used for thin wood veneers. The flat wire damages the material less than round wire staples.

For reupholstering four dining room chairs, 1,000 staples should usually be sufficient. Depending on the size of the chairs and the number of staples needed per upholstered surface, you have a good reserve. (Roughly calculated: With about 50-80 staples per chair, 1,000 pieces are enough for 12-20 chairs.)

The 12 mm staples are suitable for a variety of wood materials, especially when the layer to be fastened and the wood thickness together are not significantly deeper than the staple length. For optimal hold, the staple should penetrate the supporting material by about two-thirds.

Yes, the flat wire is specially designed for increased stability. In conjunction with the 1.2 mm thickness, it ensures a firm hold in various materials.

Yes, the staples are versatile and suitable for various materials. Their 1.2 mm thickness offers robust performance.

Yes, these 12 mm flat wire staples are designed for a secure and firm fastening that lasts. They offer reliable fixation, even for demanding projects in the DIY or professional sector.

The flat wire staples with a length of 12 mm are well suited for securely attaching vapor barrier films to roof battens. Their 1.2 mm thickness offers the necessary robustness for this application.

Yes, the flat wire clips are well suited for attaching cables to wooden strips. The 12 mm length and 1.2 mm thickness provide a secure hold.