Professional clamping table, foldable

Yes, the adjustable clamping jaws also allow the processing of workpieces that protrude beyond the table surface. Additional external clamps can also be easily attached to the MDF boards or the base frame.

The professional clamping table has a fixed working height of approx. 78.5 cm. For longer, seated activities, a correspondingly high work chair or stool is recommended to ensure an ergonomic posture.

Yes, the foldable professional clamping table can be stored compactly and weighs only approx. 7.8 kg. It is ideal for easy transport in the trunk or for storage in tight spaces.

The powder-coated base offers good rust protection. However, the MDF boards are not permanently waterproof; the work table should be protected from prolonged rain and stored dry.

The professional clamping table is characterized by simple handling. It is quickly set up and ready to use immediately, a complicated assembly is not necessary.

The maximum table height is approx. 78.5 cm. For a height of 1.85 m, this height for standing work is rather low and can lead to an uncomfortable posture. (Roughly calculated: The ideal working height is about 90-100 cm for most work).

Yes, the workbench can bear up to 150 kg and offers good stability. It is also stable enough for more forceful planing or sawing work.

Yes, the clamping table can bear up to 150 kg and is therefore also suitable for heavy engine parts. Pay attention to an even weight distribution.

Yes, the adjustable plastic jaws allow precise fixing of workpieces of different sizes and shapes, including round objects. The clamping range is between 18 and 255 mm.

Yes, the model WF-816172 is foldable and can be stored very space-savingly. It usually also fits behind a normal workshop door.

Yes, the clamping table offers a maximum clamping range of 255 mm. This means that wooden boards up to 25 cm wide can also be securely clamped.

The folding construction allows for quick setup and space-saving storage in a few simple steps. With a weight of 7.8 kg, the table is easy to handle.

Yes, the professional clamping table is also suitable for demanding planing work with a load capacity of up to 150 kg and its robust construction. The non-slip feet ensure a secure hold.

Yes, the clamping table can bear up to 150 kg and is versatile. It is stable enough to cut tiles on it.

The minimum clamping range of the table is 18 mm. Smaller workpieces cannot be securely fixed with it.

The four plastic clamping jaws are not permanently connected to the worktops and can be easily removed or moved. This allows flexible use of the table surface, e.g. for painting.

The clamping supports are made of stable 18 mm thick MDF boards, which are designed for typical DIY work. However, direct cuts or drilling into the boards should be avoided to maintain the service life.

Yes, the clamping table is designed for frequent folding. The easy handling supports trouble-free daily use.

Yes, the clamping table can be used in a versatile way in the house or workshop. It is also well suited for precise model building and soldering work.

The plastic clamping jaws included in the scope of delivery are designed to gently fix sensitive workpieces. They usually leave no marks on wood or painted surfaces.