Sheet metal nibbler attachment

The cutting track width of the nibbler is 4 mm. Due to the cutting edge-friendly operation without deformation, little to no filing is usually necessary. (Roughly speaking: The cutting track is about as wide as two 2-cent coins placed on top of each other.)

Yes, the attachment is specially designed for cutting flat and corrugated plastic materials. Round cutouts with a minimum diameter of 24 mm are precisely possible with it.

Yes, the attachment has a compact design and a total length of approx. 180 mm with handle. This facilitates use in confined spaces.

With this attachment, you achieve clean cuts without deforming the material. This keeps the edges smooth and precise.

Yes, the nibbler attachment effortlessly cuts flat and corrugated plastic materials and causes no sparking. This helps to keep the work clean.

The Knabber attachment itself weighs 400 g. The overall handling depends heavily on the weight and balance of your drill used. We recommend testing this in advance with your own machine.

No sparks are produced when using the sheet metal nibbler attachment. Deformation of the material is also avoided, which is ideal for working on sensitive surfaces.

No, the sheet metal nibbler attachment works without sparks, which increases safety and protects surfaces.

Yes, the attachment can easily cut copper sheet up to a thickness of 2 mm. Copper is a non-ferrous metal for which the device is designed.

The sheet metal nibbler is designed not to deform the processed material. This allows clean cuts without strong material deformation.

The sheet metal nibbler attachment comes with two cutting heads. These are intended for replacement when a head is worn, and can be changed if needed.

The sheet metal nibbler attachment is designed to effortlessly cut tight radii and precise cutouts. Jamming is not to be expected when used as intended.

Yes, the sheet metal nibbler attachment is specially designed for cutting flat and corrugated materials made of sheet metal or plastic.

For stable and precise cuts, materials should be fixed in advance. This minimizes deformations and ensures a clean cutting edge. Freehand work is only recommended to a limited extent and with the appropriate skill.

The sheet metal nibbler attachment comes with two cutting heads, so you are prepared for longer projects or a change.

Yes, the attachment is suitable for cutting flat and corrugated sheet metal materials, which also includes thin sheet metal for ventilation ducts.

Yes, the device is suitable for cutting plastic materials such as PVC foils. This also allows precise cutouts for pipe penetrations to be made.

Yes, the sheet metal nibbler is suitable for cutting plastics up to 2 mm thick. This allows you to make precise cutouts in your rain barrel.

Yes, the attachment can cut non-ferrous metals up to 2 mm thick. Aluminum falls into this category and can be processed precisely with it.

Yes, the device enables effortless cutting of tight radii and precise cutouts in sheet metal and plastic.

The nibbler can cut stainless steel up to a maximum thickness of 1.2 mm. For 1.5 mm thick stainless steel plates, the cutting performance of this attachment is unfortunately not sufficient.

The nibbler attachment does not generate sparks, but fine metal or plastic chips are produced during cutting. Some contamination from chips is therefore unavoidable. Clean the tool after use and store it in a dry place.

Yes, the attachment is designed for precise cutouts and is therefore well-suited for fine work on sheet metal or plastic.

Yes, the minimum cutout-Ø of 24 mm allows precise small holes. The nibbler is also designed for tight radii.

Yes, thin tinplate falls under steel up to 1.8 mm and can be cut with the nibbler. Note the maximum cutting capacity for steel.

The sheet metal nibbler attachment is designed to be operated with a drill. Pay attention to a maximum speed of 3000 min-1 of your drill.

Yes, the attachment is suitable for cutting materials made of plastic, which includes plexiglass, as well as sheet metal.

Yes, the attachment is designed for corrugated plastic materials and cuts them precisely.