Internal wedge screw extractor set (left-handed) 7-piece

The set is specially designed for internal wedge heads (E-Torx), such as E10 to E40. This tool is not suitable for normal Torx screws with an internal profile.

The product description does not provide information about an explicit numbering of the individual extractors. However, the sizes are designed for the E10 to E40 range, which allows for a quick assignment.

Yes, the set is ideal for the workshop and effectively removes damaged screws. The tool is suitable for common screw sizes in the automotive sector between E10 and E40.

Yes, the 7-piece set is versatile and ideal for the workshop. Damaged Torx screws in the E10 to E40 range can usually be easily removed with it.

Yes, the internal spline screw extractor set is designed for sizes from E10 to E40. A damaged E12 head therefore falls within the covered range and should be able to be loosened.

The pro quality and the robust material of the 7-piece set guarantee a long service life. The tool is designed for precise work and is designed for permanent use.

The set covers screw sizes from E10 to E40. For smaller screws on bicycles that are under E10, this set may not be suitable. Please check the exact screw size.

The internal hexagon screw extractor set is designed for damaged screw heads of sizes E10 to E40. If the internal hexagon is in this size range and is damaged, loosening should be possible.

The set is designed for sizes from E10 to E40. The smallest extractor (E10) is usually suitable for screws from M4/M5 upwards. For very small M3 screws, it might be too big.

The extractors are designed for use with a ratchet or a wrench. An impact wrench could damage the tool or the screw and is not recommended.

Yes, the set is made of robust material and designed for professional quality. It is intended to easily and quickly loosen even tight, damaged screws.

The internal wedge screw extractor needs a remaining profile in the screw head to be able to grip. If the head is almost completely torn off, a secure hold may not be guaranteed under certain circumstances.

The left-hand rotation principle of the extractor engages the damaged screw head. When turning to the left, the screw is loosened, while the extractor anchors itself even more firmly in the head due to the pressure that arises.

The 7-piece set is specifically designed to loosen damaged screw heads. With screws that are rusted in place, the effect may vary, the focus is on gripping a broken head.

Yes, with heavily corroded screws, it is strongly recommended to treat the thread with a penetrating oil before using the extractor. This makes extraction much easier.

Store the set dry and sorted in the supplied holder. Regular cleaning after use preserves the sharpness of the edges and prevents corrosion.

The 7-piece internal wedge screw extractor set is designed for sizes from E10 to E40. This covers a versatile range of applications.

The set contains sizes E10, E15, E20, E25, E27, E30 and E40. A special extractor for size E12 is not included in this set.

The E10 extractor is suitable for smaller screws in sensitive areas. The fit must match exactly the E10 internal spline head.

No, the extractors are designed exclusively for loosening and removing damaged or rounded internal spline screws. They are not suitable for tightening.

No, this set is a so-called left-hand turner and is primarily designed for removing standard right-hand thread screws. With left-hand thread screws, it would tighten them instead of loosening them.

The tool set is made of robust material in professional quality and is described as durable. It is ideally designed for use in the workshop and should withstand permanent use.

The set is designed as a left-hand turner and is intended to loosen normal (right-hand thread) screws. For left-hand thread screws, you would need a right-hand turner extractor.

Yes, the set is made of robust material and is of professional quality. It is durable and ideal for use in the workshop, even with repeated use.

No, this set is designed as a left-hand extractor and is only used to loosen damaged screws. Other tools are provided for tightening screws.

The 7-piece screw extractor set is designed for sizes E10 to E40. These sizes are more intended for larger applications in the workshop and less for filigree furniture screws.

The internal wedge screw extractor set is specially designed to loosen damaged screw heads. It grips the remaining profile of the screw to unscrew it.

No, with this internal wedge screw extractor, pre-drilling is not necessary. The extractors are designed to penetrate directly into the damaged head and grip it in order to loosen the screw.