Hole punch set in wooden box, 10 pieces

Yes, the hole punch set is also suitable for softer materials such as rubber or plastic. It also provides clean cut edges here.

The precision-ground hole inserts ensure clean and exact cuts even with the small diameters of 5 mm and 6 mm.

The hole inserts are made of alloyed stainless steel and are hardened. This material selection ensures a long service life and long-lasting sharpness, even with regular use.

The set is designed for rubber and plastic. With fabric-reinforced rubber, the result depends heavily on the type and density of the fabric; a test on a remaining piece is recommended.

The 150 mm holder is self-centering and the hole inserts are precision-ground, which minimizes the effort. However, a firm blow with a hammer is required.

The hole inserts are simply screwed onto the holder. The change is uncomplicated and quickly done if you want to switch between different sizes.

To maintain sharpness, the inserts should be cleaned after use and stored dry in the wooden box. Impacts on hard surfaces should be avoided.

The set with its hardened and precision-ground hole inserts is also very suitable for cleanly punching materials such as thin leather, cardboard or felt.

Yes, the hardened and precision-ground hole inserts made of alloyed stainless steel enable precise cuts even in firmer variants of these materials.

The self-centering holder with centering tip helps to position the hole inserts accurately. This also enables precise successive cuts for concentric rings.

Yes, the hole punch set is also suitable for clean and precise punching of holes in thin plastic sheets thanks to its precision-ground inserts.

The precision-ground hole inserts made of alloyed stainless steel ensure clean and precise cuts. This is also ideal for filigree work in rubber or plastic.

Yes, the hole punch set is ideal for a variety of DIY jobs. Punching clean holes for eyelets in tarpaulin patches is easily possible with it.

The self-centering holder with its spring-loaded centering tip is ideal for this. It helps you to align the hole punch precisely in the desired position before punching.

Yes, the hardened and precision-ground hole inserts are designed to achieve clean and exact cut edges, especially when making sealing rings.

Yes, the set can also be used for thin craft felt, as long as the material is not too fibrous. The precise blades enable clean cuts.

Yes, the hardened and precision-ground inserts are designed to create clean and exact edges even in firmer materials such as cork-rubber mixtures or plastics.

Yes, the ice punch set comes in a sturdy wooden box. The 10-piece inserts and the holder are clearly and safely stored in it.

Thanks to the hardened and precision-ground hole inserts made of alloyed stainless steel, the tool can also cleanly process thicker rubber sheets up to 3 mm thick.

Yes, the hole punch set is ideal for making sealing rings and similar round shapes. The precision-ground inserts allow for clean results.

The hole inserts are precision-ground and the holder is self-centering with a spring-loaded centering tip. This enables very accurate and precise holes, ideal for valves or similar applications.

Yes, thanks to the self-centering holder and the spring-loaded centering tip, the set can be precisely positioned. This facilitates the precise punching of rings with inner and outer diameters.

The spring-loaded centering tip automatically serves as an ejector. It pushes the punched ring directly out of the hole punch after the cut.

The set is designed for the production of sealing rings made of rubber, plastic and leather. The maximum material thickness depends heavily on the respective material, but the tool is well suited for typical sealing thicknesses.

Absolutely. The precision-ground hole inserts and the self-centering holder allow for clean and tear-free holes in trim materials, ideal for clips or cable glands.

The hole punch set is equipped with a self-centering holder and a spring-loaded centering tip. These features help you to position the holes precisely and punch them cleanly.

Yes, the spring-loaded centering tip also serves as an ejector. It ensures that punched-out parts are reliably removed, even with tougher materials.

The hole inserts are made of alloyed stainless steel and are additionally hardened. These material properties ensure high resistance and durability, even with frequent use.