Dirty water submersible pump, 550 watts, stainless steel

Yes, with a minimum suction level of 3.5 cm, the pump can largely dry your garage floor. Only a thin film of water will remain.

With a flow rate of up to 10,000 liters per hour, the pump can empty a 5,000-liter garden pond very quickly. This corresponds to a pumping time of less than half an hour.

Yes, the stainless steel construction makes the pump particularly robust and resistant to corrosion. This ensures a long service life.

Thanks to the stainless steel construction, the pump is particularly robust and resistant to corrosion. This ensures a long service life, even in demanding applications with dirty water.

Yes, the pump is suitable for dirty water and can handle particles up to a size of 35 mm. Muddy water with small stones is therefore not a problem.

The pump has dimensions of Ø 16 cm and a height of 34 cm. Please check the dimensions of your light well to ensure a proper fit.

The float switch enables a minimum suction level of 3.5 cm. The exact switch-on level can be determined by the individual setting of the float switch.

The pump is explicitly designed for pumping dirty water. It is therefore ideally suited to remove water from flooded yards, even if it is not clear.

The powerful 550 watt motor enables rapid pumping of dirty water. The pump is designed for applications in garages, basements, tanks and shafts.

The pump has a maximum head of 6.5 meters. Within this height, it can also pump the water over a longer distance from the cellar to the street.

Yes, the WF-860257 is specially designed for use in garages, cellars and shafts. It reliably pumps away dirty water.

The pump is well suited for emptying tanks. With its high flow rate of up to 10,000 l/h, even larger tanks can be emptied efficiently.

Yes, the pump has a flow rate of up to 10,000 liters per hour. A 5,000-liter rain barrel can be emptied in about 30 minutes with it.

Yes, the pump is made of robust stainless steel, which makes it particularly durable. It is designed for use in shafts.

The pump is equipped with versatile connection sizes of 1", 1¼" and 1½". This allows connection to common hose systems and pipelines.

Yes, the WF-860257 has a cable length of 10 meters. This should provide sufficient range for most deeper wells and tanks.

Yes, the pump is specially designed for use in basements. With a flow rate of up to 10,000 l/h, you can quickly pump away large amounts of water. This corresponds to about 165 liters per minute.

The pump weighs about 5.6 kg. This weight is easy for most people to handle alone, especially due to the compact design of Ø 16 x H 34 cm.

This pump is specially designed for dirty water and handles particles up to a diameter of 35 mm. Smaller leaves and branches that do not exceed this size will be pumped out without any problems.

Yes, the WF-860257 is a submersible pump and must be fully submerged for proper operation. This cools the motor and ensures full suction power.

The pump is ideally suited for draining garages, basements, tanks and shafts. It was specially developed for clear and dirty water.

No, it is recommended to clean and store the pump dry after each use. This contributes to the longevity of the WF-860257 and prevents unnecessary contamination.

The pump has a maximum flow rate of 10,000 liters per hour. A pool with 10,000 liters would theoretically be emptied in about an hour. (Roughly calculated: approx. 10,000 l / 10,000 l/h = 1 hour).

The pump is made of robust stainless steel, which makes it particularly corrosion-resistant. It can easily remain in the water for a longer period of time if necessary.

The product description of the WF-860257 does not provide any specific information on suitability for hot water. It is designed for clear and dirty water in the usual temperature range.

With a flow rate of up to 10,000 liters per hour, the pump is very powerful. It is ideal for quickly pumping large amounts of water away in the event of flooding.

The submersible pump is specially designed to pump dirty water. Smaller suspended solids are not a problem for operation.

The pump is specially designed for sucking dirty water and is therefore well-suited for musty water from ditches. Its high flow rate of up to 10,000 l/h ensures quick results.