Water detector CC-500

Yes, the water detector has the protection class IPX6. This means it is protected against strong jets of water and is therefore also suitable for more humid environments such as basements.

The CC-500 detector alarms immediately upon contact with water. The IPX6 water protection rating protects the device against strong jets of water, so the alarm continues even in the event of complete, short-term flooding. After drying, the detector is fully operational again.

The included 9-volt block battery keeps the detector ready for operation for a long time. A regular battery change is recommended to ensure constant readiness, as well as a monthly function test. (Roughly speaking: In pure standby mode, a 9V alkaline battery can last about 1-2 years, this depends heavily on the quality and environment.)

The product data does not specify explicit temperature resistance for operation in frost. For maximum service life, we recommend storing the detector in heated rooms when there is a risk of frost.

The water detector has an integrated function test for the sensors. You can check the device's operational readiness at any time.

The CC-500 is battery-operated and can be used flexibly. For use in a motorhome during a long absence, we recommend regular function tests and, if necessary, a battery change in advance.

The proven technology of the water detector ensures reliable function. You can rely on the water detection.

The water detector CC-500 is designed for easy installation. You can quickly put the device into operation without special tools.

The CC-500 is very compact with a height of 30 mm and a diameter of 83 mm. It therefore also fits into very narrow areas such as aquarium cabinets with limited space.

Yes, the detector is flexible and suitable for quick water detection. It can also be placed in basements or technical areas.

The water detector emits a loud alarm sound that alerts you immediately. The audibility on the upper floor depends on the structural condition, but is usually guaranteed with normal background noise.

Yes, the CC-500 is reusable after water contact. You can simply dry it and then use it again.

Yes, the compact design allows the CC-500 to be positioned discreetly. It takes up little space and is therefore inconspicuous.

The water detector offers fast and reliable water detection. This also applies to beginning leaks and smaller amounts of water.

The CC-500 water detector is designed for easy setup. You simply place it in the desired location; no additional fastening is required.

Yes, the installation of the CC-500 is very simple and requires no technical know-how. You simply place the device in the desired location, the battery is already included.

Yes, the CC-500 is flexible thanks to its compact design. It fits well in confined areas such as under sinks or washing machines.

The water detector CC-500 is flexible to use for water detection. It is designed for indoor spaces where water leaks can occur.

The CC-500 is designed for reliable water detection. The product description does not mention any restrictions regarding the type of water.

Yes, with a height of only 30 mm and a diameter of 83 mm, the CC-500 fits into very narrow niches. A discreet installation is therefore also possible under a corner bathtub.