Mobile Jump Starter Box - ULTRACAP MSB300A

Yes, the Jump Starter is designed for a wide temperature range from -40°C to +65°C. It works reliably even at very low sub-zero temperatures and is therefore ideal for winter use.

The jump start clamps are designed for heavy use. The device is designed for "Up to 10,000 starts possible", which requires a corresponding durability of the components.

The ULTRACAP MSB300A is designed for gasoline engines up to 3 liters displacement and diesel engines up to 2 liters displacement. Therefore, the device is not suitable for a diesel engine with a 2.2 liter displacement.

Yes, the jump starter box is suitable "For petrol and diesel vehicles". So it also works for older petrol cars like your convertible.

With the MSB300A, up to 10,000 starting operations are possible. That's enough for very long-lasting use over many years, even with frequent use.

With diesel engines, it is advisable to press the integrated preheating button before starting. Observe the indicator light to determine the optimal starting time.

The Jump Starter is designed for gasoline and diesel vehicles. Therefore, it can also be used for corresponding tractors or motorcycles.

The Jump Starter is designed for gasoline and diesel vehicles and thus supports a wide range of vehicle types.

The supplied jump start clamps are designed for standard battery terminals of gasoline and diesel vehicles. They provide a secure contact for jump starting.

The specification of up to 10,000 starts refers to the high cycle stability and thus the lifespan of the ultracapacitors. A single full charge does not allow 10,000 starts, but the technology is designed for many charge and discharge cycles.

The product description lists the preheating button as a function of the device. For detailed instructions on use and the exact areas of application, please refer to the enclosed operating manual.

The Jump Starter ULTRACAP MSB300A is designed exclusively for jump starting. It has a USB input for pre-charging the device, but not an output function as a power bank for external devices.

The device is suitable "For gasoline and diesel vehicles". If the motorcycle or scooter has a corresponding gasoline or diesel engine and a 12V electrical system, use is possible.

The box is designed to save space and is very light. Whether it fits in the glove compartment depends on its size; however, it is intended for easy storage in the vehicle.

The charge level indicator provides you with reliable information about the current charge status of the device. It is designed to clearly show you the readiness for use.

The device enables "Up to 10,000 jump starts". So you don't have to recharge it immediately after each use. The charge level indicator helps to check the current status. (This corresponds to an extremely high number, which is sufficient for many years of use.)

The ultracapacitors of the Jump Starter charge from the residual energy of the weak battery. Even with very low residual voltage, enough energy is collected for an immediate start. So your vehicle is quickly ready to go again.

The box is explicitly designed as a "Mobile Starthilfe Box". It is used exclusively to assist with the starting process and not for charging or trickle charging the car battery.

Yes, with a weight of "only 1,200 g" the device is "very light" and "space-saving to store". This allows it to be carried comfortably in the vehicle.

The "control light" is used to display the status of the device. A specific display for correctly connected jump start clamps is not listed in the product description.

The jump starter box is universal "For gasoline and diesel vehicles". There is no restriction on the vehicle size in the description.

The Jump Starter is designed for gasoline and diesel vehicles. These usually use 12V batteries. Specific restrictions on battery types are not listed in the product description.

The jump start clamps are designed for a safe and stable connection to the vehicle battery.

Yes, the device is designed for exceptionally high stress. Up to 10,000 starting operations are possible over the entire life of the box.

The integrated preheating button supports the starting process especially in diesel vehicles and is intended for this purpose.

At only 1,200 g, the mobile jump starter box is particularly light and can be stored in the vehicle to save space thanks to its compact design.

The jump starter box has a charge level indicator that informs you about the current charge status of the device at any time.

The low weight of 1,200 g does not affect the robustness. The jump starter box is designed for a long service life and up to 10,000 starts, which implies a high processing quality.

The jump starter is intended "for gasoline and diesel vehicles". This usually also includes modern vehicles with start-stop automatic.

Yes, the jump starter box is universally designed for starting gasoline and diesel vehicles.