Dirty water submersible pump "DRAIN 10000 Comfort"

The extremely powerful, compact, and reliable AL-KO DRAIN 10000 Comfort submersible dirty water pump effortlessly pumps away dirt and suspended particles up to 30 mm in size thanks to its large intake opening.

• Extra-strong, robust dirty water pump with 650 watts of power
• Special impeller technology for extreme requirements
• Universal angle connection and combination nipple included
• Automatic shutdown thanks to float switch
• Particle sizes up to 30 mm, maximum flow rate 10,000 l/h, discharge head up to 8 m

Dirty water pumps are used when heavily contaminated liquids need to be removed, e.g., after severe flooding, in polluted ponds or cisterns, or when draining excavations. Then they have to move not only water but also dirt particles. This significantly increases the strain on the material and the motor's performance.

It's good if it's an AL-KO pump. Thanks to the special vortex impeller geometry, the DRAIN 10000 Comfort model effortlessly handles even heavily contaminated water with up to 5 percent suspended debris and grain sizes up to 30 mm. A maintenance-free motor, the specially treated stainless steel motor shaft, and the glass-fiber-reinforced polypropylene housing guarantee a long service life for AL-KO dirty water pumps.

Thanks to the practical, integrated carrying handle and the 10 m long power cable, as well as its low weight of only around 5.7 kg, the dirty water pump can be used mobile or stationary for drainage – including clear water, of course. However, thanks to its compact dimensions of 24.2 x 19.0 x 35.3 cm and its durable housing and long-lasting pump motor, it is also ideally suited as a pond pump or rain barrel pump. The AL-KO DRAIN 10000 Comfort submersible pump can easily handle even coarser water debris thanks to its extra-large intake openings. Both clear and dirty liquids with a particle size of up to 30 mm are pumped out quickly and safely.

The specially treated motor shaft, made of durable stainless steel, and the glass-fiber-reinforced polypropylene housing ensure a long service life for this practical helper. With its powerful 650 W output and a flow rate of up to 10,000 l/h, emptying and transferring is completed in no time. The AL-KO DRAIN 10000 Comfort submersible pump is equipped with a float switch and starts the pumping process automatically thanks to automatic level control. It is designed for submersion depths of up to 5 m. With a discharge head of up to 8 m, even very great depths can be managed. The pump outlet has a size of 1.25", which corresponds to approximately 41.9 mm. The 90° angle connection has a universal connector, and all standard hose sizes can be connected using the included combination nipple.

Note: The submersible pump is not suitable for drinking water, but only for domestic water below 35°C. It is also not suitable for use in salt water, water containing aggressive chemicals, or water containing sand.