Dirty water submersible pump "DRAIN 7500 Classic"

Thanks to its large intake opening, the compact and reliable AL-KO DRAIN 7500 Classic submersible dirty water pump effortlessly pumps away even water containing dirt and suspended particles up to 30 mm in size.

• Robust submersible dirty water pump with 450 watts of power
• Special impeller technology for extreme requirements
• Universal angle connection and combination nipple included
• Automatic shut-off thanks to float switch
• Particle sizes up to 30 mm, maximum flow rate 7,500 l/h, discharge head up to 6 m

Dirty water pumps are used when heavily contaminated liquids need to be removed, e.g., after severe flooding, in polluted ponds or cisterns, or when draining excavations. In these cases, they must move not only water but also dirt particles. This significantly increases the strain on the material and the motor's performance.

It's good if it's an AL-KO pump. Thanks to the special vortex impeller geometry, the DRAIN 7500 model effortlessly handles even heavily contaminated water with up to 5 percent suspended debris and grain sizes up to 30 mm. A maintenance-free motor, the specially treated stainless steel motor shaft, and the glass-fiber-reinforced polypropylene housing guarantee a long service life for AL-KO dirty water pumps.

Thanks to the practical integrated carrying handle and 10 m long power cable, as well as its low weight of only around 4.4 kg, the dirty water pump can be used mobile or stationary for drainage – including clear water, of course. However, thanks to its compact dimensions of 21.3 x 15.2 x 30.8 cm, its solid housing, and its durable motor, it is also ideally suited as a rain barrel pump. The AL-KO DRAIN 7500 Classic submersible pump can easily handle even coarser water debris thanks to its extra-large intake openings. Both clear and dirty liquids with a grain size of up to 30 mm are pumped out quickly and safely.

The specially treated motor shaft, made of durable stainless steel, and the glass-fiber-reinforced polypropylene housing ensure a long service life for this practical helper. With its powerful 450 W output and a flow rate of up to 7,500 l/h, emptying and transferring water is completed in no time. The AL-KO DRAIN 7500 Classic submersible pump is equipped with a float switch and starts the pumping process automatically thanks to the automatic level control. It is designed for submersion depths of up to 5 m. The discharge head of up to 6 m allows for even greater depths. The pump outlet measures 1.25 inches, which corresponds to approximately 41.9 mm. The 90° elbow connection features a universal connector, and the included combination nipple allows connection to all standard hose sizes.

Note: The submersible pump is not suitable for drinking water, but only for domestic water below 35 °C. It is also not suitable for use in salt water, water containing aggressive chemicals, or water containing sand.