Fully automatic preserving kettle model WAT 25 A - stainless steel with timer and all-plastic tap

The WAT 25 A has an all-plastic drain tap that is designed for easy and reliable operation. Regular cleaning and care is recommended for permanent tightness.

Yes, the WAT 25 A can also be used excellently to keep drinks like mulled wine or punch warm. The integrated timer supports the desired warming time.

When heating up and during cooking, the WAT 25 A produces a certain operating noise, similar to that of a kettle or saucepan. However, it is not excessively loud and is not normally perceived as disturbing.

Yes, strong bubbling is normal at temperatures near the boiling point (like 95°C). To reduce excessive evaporation, the lid should remain closed during operation.

Yes, the WAT 25 A is made of stainless steel, a robust and durable material. Stainless steel is known for its corrosion resistance and durability, even with frequent use.

The WAT 25 A is equipped with a timer that is designed for the usual cooking times. Specific information on the maximum setting duration is not included in the product description.

Exact dimensions of the WAT 25 A are not specified in the current product description. For space requirements, one should consider the height and diameter of a common preserving machine with a volume of 25-30 liters.

The water heats up quickly, the exact time depends on the starting temperature and the fill quantity. By using a lid, evaporation is minimized during operation.

The machine holds 14 jars of 1 liter each. For 20 liters of apple juice, i.e. 20 jars, you will therefore need two fillings of the machine. (About 14 liters per filling.)

As a fully automatic preserving machine, the WAT 25 A is designed to reliably maintain the set temperature during the canning process. This is a core function of a machine of this type.

Yes, the WAT 25 A has a safety switch. This interrupts the heating function as soon as the device has boiled dry to avoid damage.

The WAT 25 A works with a heating coil during the heating process, which usually does not cause excessive noise. A specific noise level is not listed in the product description.

The all-plastic tap is designed to allow easy and drip-free removal of liquids, even when the machine is full. It is smooth-running and reliable.

The plastic lid of the WAT 25 A is thermally insulated so that it does not get too hot during operation. Plastic is usually very easy to clean, usually a damp cloth is sufficient.

Yes, the WAT 25 A is equipped with special stainless steel cold grips. These remain cool even at high operating temperatures and allow safe transport of the filled machine.

A preserving machine of this type usually holds a larger number of jars. The exact number depends on the size and shape of the jars used, but typically allows for preserving several batches at once. (As a rough guide, up to 14 jars of 1 liter each often fit in, depending on stacking and glass shape.)

The WAT 25 A is primarily designed for preserving food. Theoretically, other materials such as wax can also be melted in it, as long as they do not attack the seals or the tap. Thorough cleaning afterwards is important.

The WAT 25 A is equipped with a timer that allows precise control of cooking times. It is suitable for longer processes, but should not be operated unattended.

The juicer circuit of the WAT 25 A is a special thermostat function. A suitable juicer attachment is not included and must be purchased separately if required.

Yes, the automatic preserving machine is made of robust stainless steel. This material is durable and resistant, even with frequent use, and is also easy to clean.

The WAT 25 A holds up to 14 glasses of 1 liter. With smaller glasses, the number may vary, as the glasses can then be stacked more closely or differently.

Yes, the automatic preserving machine maintains the set temperature constant throughout the entire process. If it cools down, the device automatically reheats to maintain the target temperature.

Yes, the WAT 25 A can also be used for gentle cooking of stews or soups. Make sure to stir regularly and avoid burning. Pure dairy products should be avoided.

Yes, thanks to the stainless steel housing, the WAT 25 A is usually easy to clean. After cooling down, the device can be wiped with a damp cloth and the interior cleaned.

The exact length of the connection cable for the WAT 25 A is not listed in the product description. Cables for kitchen appliances are usually dimensioned to reach a nearby outlet.

To keep mulled wine warm for hours, a thermostat setting between 70°C and 80°C is recommended. This keeps the mulled wine hot without boiling or evaporating.

No, the automatic preserving machine WAT 25 A is a stand-alone electrical appliance. It is not intended for operation on external heat sources such as an induction hob.

The exact number of jars that fit in the WAT 25 A is not specified in the current product description. The capacity usually depends on the size and shape of the jars used.