Weed brush polyamide thread (nylon) square 3.3/380 mm, 30 pieces

Moistening the threads with water is not mandatory, but is recommended for better lubricity and thus more effective cleaning. The threads also work dry, but the wear and tear could be slightly higher.

The durable polyamide thread is designed for heavy use. It ensures a long service life, even with frequent use.

The threads enable precise work without damaging the surface. Therefore, they are also suitable for removing moss and weeds in edge areas near walls.

The weed brush is intended for paved surfaces and kerbs. Caution is advised when used near sensitive plants to avoid damage. Operate the device in a controlled manner.

The durable polyamide threads are robust and gentle on the surface. They hold up well in contact with stones, but extreme or permanent contact increases wear and tear.

The replacement threads are specially designed for brush heads that have a receptacle for 4 threads in a 4-sided profile and the dimensions 3.3 x 380 mm. A fit for other systems cannot be guaranteed.

Yes, these polyamide threads are designed as a replacement for weed brushes or grass trimmers with a corresponding thread mount of 3.3 mm diameter. They enable precise and gentle weed removal.

Yes, the durable polyamide threads are specially designed to remove moss and weeds while protecting the surface and enabling precise work without damage.

Yes, the polyamide threads are specially designed to protect the surface from damage and scratches. They glide gently through the joints and are also suitable for uneven surfaces like older paving stones.

The threads loosen moss and weeds from the surface. These loosened plant remains stay on the surface and should be swept up or removed with a leaf blower after cleaning.

The threads can also be used in wet weather. The product description even mentions moistening with water for better glide. The important thing is just to ensure a secure stance when working.

The threads allow for precise work without damage. This is advantageous for removing moss and weeds even in tight areas.

The threads are specially designed for brush heads that are designed for 4 threads. They are compatible with a 4-sided attachment.

The 4-Kant-Profil of the threads enables easy handling and supports an efficient and precise way of working when removing weeds.

Yes, the replacement threads for the weed brush with a diameter of 3.3 mm penetrate deep into the joints. The 4-sided profile ensures effective cleaning even in narrow spaces.

The threads are ideal for removing moss and weeds. In the case of very firmly rooted growth, repeated use or an adapted working method may be necessary.

The threads have a thickness of 3.3 mm in a 4-edge profile. Please check the manufacturer's specifications of your trimmer to see if this thread cross-section is compatible.

The threads are ideal for removing moss and weeds. Their durable polyamide quality supports effective use.

The threads penetrate deep into the joints and loosen weeds including their roots. For optimal effect, the weeds should not be too woody or extremely deeply rooted so that the threads can still grab and remove them.

The pack contains 30 durable polyamide threads. The exact range depends on the intensity of use and the condition of the surface.

Yes, the unused nylon threads can easily be stored in their packaging. No special storage is required for the polyamide material as long as they are kept dry.

Yes, the threads are designed to be gentle on the surface. Therefore, they can also be used on gravel surfaces to remove moss and weeds.

The set contains 30 nylon threads. Since a weed brush is usually equipped with 4 threads, the set allows for about 7 to 8 complete thread changes (roughly calculated: 30 threads / 4 threads per use = approx. 7.5 sets).

Yes, the threads protect the surface and enable precise work. They are suitable for removing moss and weeds on various surfaces.

The 4-sided threads are designed for easy handling and precise work. This contributes to the effective removal of moss and weeds.

Moistening the threads with water is not absolutely necessary, but is recommended if needed. It can improve the lubricity and facilitate cleaning.

The threads are ideal for removing moss and weeds. For extremely dense wild growth, a stronger machine or a different attachment may be necessary.

A brush head requires 4 threads, so the 30-piece set allows for about 7 full re-equipments. The actual range depends heavily on the intensity of use and the condition of the surface. (Roughly speaking: The set should be sufficient for several seasons with normal use on an average patio area).

The package contains 30 durable polyamide threads. Their durability ensures a longer service life over several uses.

Yes, the replacement threads are made of robust nylon and are designed not to damage the surface. They remove weeds and moss without leaving scratches on paving stones or patio slabs.