Pneumatic tool set, 13 pieces

Yes, the set is suitable for cleaning and drying surfaces. The blow gun is ideal for garden furniture to remove dust and loose dirt.

Yes, the set contains a tire inflator with a pressure gauge and is ideal for precise pressure testing and filling of car tires. The operating pressure up to 8 bar supports this reliably.

The housings of the blow gun and tire inflator are made of robust aluminum. Regular cleaning with a dry cloth and dry storage protect against corrosion and ensure a long service life.

The manometer accuracy is ±0.1 bar, which is more than sufficient for the precise inflation of scooter tires and other vehicles. The operating pressure is up to 10 bar.

Yes, the main unit weighs only 120 g, which allows for very comfortable handling even during longer use. The lightweight aluminum housing contributes to this.

Yes, the tire filler included in the set is suitable for inflating bicycle tires. The pressure gauge allows for precise pressure control.

It is recommended to use the drain valve after each use to remove moisture from the device. This contributes significantly to the longevity and functionality of the compressed air tool set.

Yes, the tire inflator can be operated with an operating pressure of 0-10 bar, so 6 bar is sufficient. However, higher pressures are often required for truck tires.

The tire inflator weighs 240 g, the blow gun even only 120 g. The low weight of the components should not cause any problems even with prolonged use and checking several tires.

All parts of the set are equipped with a standardized compressed air connection R ¼". No additional adapters are necessary for common compressors.

Your compressor should be able to deliver at least 8 bar to use the full power of the set. The set is conditionally suitable for truck tires, as these often require higher pressures and larger air volumes than are usually required for car tires.

Yes, the set is very light at only 120 g, which also allows for longer use without fatigue. The ergonomic handling is additionally supported by the aluminum housing.

The tire inflator hose has a length of approx. 41 cm. This length is usually sufficient to reach and inflate even inconveniently positioned valves well.

Yes, the set contains 3 inflation nozzles that are suitable for filling air mattresses, balls or similar items. Pay attention to the appropriate adapter for your valve.

The blow gun has an air consumption of approx. 85-140 l/min. A compressor with an output of 150 l/min is sufficient for continuous operation and should not run constantly.

The operating pressure of up to 8 bar can be too high for sensitive electronics. It is recommended to regulate the pressure on the compressor to avoid damage.

The set requires an air consumption of 85-140 l/min. With a compressor output of 90 l/min, there may be short waiting times until the pressure is built up again if the set consumes a lot of air (up to 140 l/min).

Yes, the blow-out gun is suitable for cleaning car interiors. Use one of the smaller nozzles and adjust the pressure for sensitive surfaces such as the dashboard.

Yes, the set is ideal for quick and effective cleaning of motorcycle chains and other hard-to-reach places due to the high operating pressure.

Yes, the blow gun is ideal for quickly drying surfaces, rims, and hard-to-reach folds after washing. The airflow efficiently removes water.

The blow gun can be used for sensitive electronics such as laptop fans. Set the pressure low (e.g. via the relief valve) and keep your distance to avoid damage.

The blow gun consumes approx. 85-140 l/min. With a compressor of 100 l/min, continuous operation is possible, but the compressor must pump up, which can lead to short interruptions. (Roughly calculated: With 100 l/min compressor output and 100 l/min consumption, this would be a balanced ratio.)

Yes, the high performance of up to 8 bar operating pressure is very suitable for the effective cleaning of workbenches, machines and other surfaces from chips and dust.

The set is primarily designed for compressed air cleaning and tire inflation. For inflatable boats, you usually need a special adapter and possibly a higher air volume, which this set does not primarily provide.

The tire inflator with manometer included in the set is designed for precise pressure testing. It can therefore be used for both car and motorhome tires.

The set is designed for continuous operation, as long as your compressor can supply an air consumption of 85-140 l/min. The aluminum construction ensures good heat dissipation from the handheld device.

Yes, the set works with an operating pressure of up to 8 bar. This strong performance is ideal for effectively removing even stubborn dirt and dust from garden tools or other surfaces.

For efficient use of the set, a compressor with a delivery rate of at least 85 l/min is required. At only 50 l/min, the compressor will run frequently and will not achieve the full performance of the set.